Skip to content
ScreenProtector.org
Preview build: the catalog is still growing. Every published fact shows its verification state; see how we verify.

POS & PAYMENT TERMINALS

Ingenico Lane/3000 Screen Protector

The Ingenico Lane/3000 is a point-of-sale and payment terminal with a 2.8" display, 320x240 (QVGA) resolution. In payment fleets this screen is customer-facing all day: PIN-entry privacy, counter impact, and terminal cleaning frequency shape the protection spec. Privacy and wipe-safe options are matched through the specification request. Screen dimensions are sourced from manufacturer documentation; protector cut dimensions are confirmed with the supplier before production.

Specs sourced from manufacturer documentationDiscontinued (still in fleets)Commercial fleet

Specs last verified 2026-09-05 · every fact links its source below.

Protector availability for this model

First-party accessory availability varies by terminal family; where the OEM lists a protector the part number is shown with its source.

FIRST-PARTY (OEM)

None found

AFTERMARKET

CUSTOM-CUT (VIA RFQ)

Available: matched suppliers cut to this model

Request fleet options for this terminalor use the form on this page

Free for buyers. Cut dimensions are confirmed with the supplier before any production run.

Device and display data

Manufacturer:Ingenico
Device family:Lane
Display diagonal:2.8 insource ↗
Screen width (active):Unknown
Screen height (active):Unknown
Display resolution:320x240 (QVGA)source ↗
Touch input:capacitive (touch version; non-touch variants also shipped)source ↗
Screen type:TNsource ↗
Brightness:Unknown
Screen surface (device):Unknown
Screens on device:Unknown
Rounded corners:Unknown
Aspect ratio (derived):Unknown
Pixel density (derived):143 PPI
Device width (housing):83.2 mmsource ↗
Device height (housing):43 mmsource ↗
Device depth (housing):180.2 mmsource ↗
IP rating (device):Unknown
Weight:254 gsource ↗
Cut dimensions:Verification required
ⓘ

Screen dimensions are the device’s active display area, not protector cut dimensions. Cut sizes depend on bezel geometry and adhesive design and are confirmed with the supplier before any production run. Housing dimensions are the overall device body, not the screen. Aspect ratio and pixel density are derived from the sourced values above.

OEM cleaning guidance

  • Soft non-abrasive cloth dampened with soapy water or approved cleaning product; apply liquid to cloth, never directly to terminal; disconnect cables first; no solvents, detergents, or abrasivessource ↗
  • Per official user guide: Ingenico cleaning kit (ingenico.cleaningcards.com); never solvents, detergents, alcohol, or abrasive products; do not clean electrical connections; unplug firstsource ↗

Published by the device manufacturer for the device. We make no compatibility claims about any screen protector and these chemicals.

Protection decision factors

Counter impact

Consider

Customer-facing privacy

Privacy film options

Frequent cleaning

Check OEM chemistry below

Frequently asked questions

What screen size is the Lane/3000?

The Lane/3000 has a 2.8" display, per Ingenico documentation.

Does Ingenico make a first-party screen protector for the Lane/3000?

We found no first-party protector for this model in the sources checked; custom-cut via matched suppliers is the current path.

What cleaning products can be used on the Lane/3000 screen?

Ingenico publishes guidance covering 2 cleaning agents for this device, listed in the OEM cleaning guidance section above. That guidance applies to the device's own screen; we make no compatibility claims between any cleaning chemical and any screen protector.

Can screen protectors for the Lane/3000 be sourced in quantity?

Yes. Submit a specification request with quantity and deployment environment, and matched suppliers respond with options cut for this model. Cut dimensions are confirmed with the supplier before any production run.

Material shortlist

PET film

Thin profile
  • Low profile
  • Cost-effective at fleet quantity
  • Verify cleaning-chemical compatibility with the supplier

✓ Discuss fit for your workflow

TPU film

Flexible film
  • Flexible application on curved areas
  • Verify impact behavior with the supplier
  • Confirm wear characteristics for your replacement cycle

ⓘ Evaluate based on workflow

Tempered glass

Rigid glass
  • Rigid construction
  • Confirm thickness and touch sensitivity on your models
  • Verify glove and stylus behavior with the supplier

ⓘ Confirm cut and fit first

Where this device runs

Industry guides covering the deployment conditions and cleaning chemistry this device faces.

RetailFood ServiceHospitality & Gaming
Sources▾

Research notes: Discontinued per official Ingenico FAQ ('no longer available for new purchases', loaded). Display conflict: official user guide (900033034 R11 000 08 / 0223, loaded) prints '2.8" backlit LCD, QVGA (800 x 480 pixels)' - internally inconsistent since QVGA is 320x240; the Ingenico Lane/3000 datasheet mirrored by Revel Systems (secondary hosting of Ingenico content, loaded) states '2.8'' backlight, QVGA (320x240 pixels)' and labels the display 'Non-Touch', while the user guide's unpacking section calls the touchscreen version standard and sells variants 'without touchscreen'. 320x240 recorded as most consistent with the QVGA label [unverified beyond this conflict]. User guide: standard version 254 g, 180.2 x 83.2 x 43 mm (device); Dual Head 40-pinshield + touch version 276 g, capacitive touchscreen. PCI PTS 5.x (Revel mirror). Barcodes Inc lists 2.8" TN (search snippet, not loaded). A stylus

More POS & Payment Terminals Material guidance Fleet installation guide

Also known as: Lane 3000, Lane3000

More POS & Payment Terminals from Ingenico: Ingenico Desk/5000Ingenico e285Ingenico iCT220Ingenico iCT250Ingenico iSC Touch 250Ingenico Lane/3600