POS & PAYMENT TERMINALS

Ingenico Lane/3600 Screen Protector

The Ingenico Lane/3600 is a point-of-sale and payment terminal with a 2.8" display, 320x240 (QVGA) resolution. In payment fleets this screen is customer-facing all day: PIN-entry privacy, counter impact, and terminal cleaning frequency shape the protection spec. Privacy and wipe-safe options are matched through the specification request. Screen dimensions are sourced from manufacturer documentation; protector cut dimensions are confirmed with the supplier before production.

Specs sourced from manufacturer documentationCommercial fleet

Specs last verified 2026-09-05 · every fact links its source below.

Protector availability for this model

First-party accessory availability varies by terminal family; where the OEM lists a protector the part number is shown with its source.

FIRST-PARTY (OEM)

None foundsource ↗

AFTERMARKET

Duratis ↗

CUSTOM-CUT (VIA RFQ)

Available: matched suppliers cut to this model

Request fleet options for this terminal or use the form on this page

Free for buyers. Cut dimensions are confirmed with the supplier before any production run.

Device and display data

Manufacturer:	Ingenico
Device family:	Lane (TETRA)
Display diagonal:	2.8 insource ↗
Screen width (active):	Unknown
Screen height (active):	Unknown
Display resolution:	320x240 (QVGA)source ↗
Touch input:	capacitive (finger, 1000K-lifespan signature)source ↗
Screen type:	Unknown
Brightness:	Unknown
Screen surface (device):	glass lenssource ↗
Screens on device:	Unknown
Rounded corners:	Unknown
Aspect ratio (derived):	Unknown
Pixel density (derived):	143 PPI
Device width (housing):	Unknown
Device height (housing):	Unknown
Device depth (housing):	Unknown
IP rating (device):	Unknown
Weight:	227 gsource ↗
Cut dimensions:	Verification required

ⓘ

Screen dimensions are the device’s active display area, not protector cut dimensions. Cut sizes depend on bezel geometry and adhesive design and are confirmed with the supplier before any production run. Housing dimensions are the overall device body, not the screen. Aspect ratio and pixel density are derived from the sourced values above.

OEM cleaning guidance

Soft non-abrasive cloth dampened with soapy water or approved cleaning product; apply liquid to cloth, never directly to terminal; disconnect cables first; no solvents, detergents, or abrasivessource ↗

Published by the device manufacturer for the device. We make no compatibility claims about any screen protector and these chemicals.

Protection decision factors

Counter impact

Consider

Customer-facing privacy

Privacy film options

Frequent cleaning

Check OEM chemistry below

Frequently asked questions

What screen size is the Lane/3600?

The Lane/3600 has a 2.8" display, per Ingenico documentation.

Does Ingenico make a first-party screen protector for the Lane/3600?

We found no first-party protector for this model in the sources checked; custom-cut via matched suppliers is the current path.

What cleaning products can be used on the Lane/3600 screen?

Ingenico publishes guidance covering 1 cleaning agent for this device, listed in the OEM cleaning guidance section above. That guidance applies to the device's own screen; we make no compatibility claims between any cleaning chemical and any screen protector.

Can screen protectors for the Lane/3600 be sourced in quantity?

Yes. Submit a specification request with quantity and deployment environment, and matched suppliers respond with options cut for this model. Cut dimensions are confirmed with the supplier before any production run.

Material shortlist

PET film

Thin profile

Low profile
Cost-effective at fleet quantity
Verify cleaning-chemical compatibility with the supplier

✓ Discuss fit for your workflow

TPU film

Flexible film

Flexible application on curved areas
Verify impact behavior with the supplier
Confirm wear characteristics for your replacement cycle

ⓘ Evaluate based on workflow

Tempered glass

Rigid glass

Rigid construction
Confirm thickness and touch sensitivity on your models
Verify glove and stylus behavior with the supplier

ⓘ Confirm cut and fit first

Where this device runs

Industry guides covering the deployment conditions and cleaning chemistry this device faces.

Healthcare Retail Food Service Hospitality & Gaming

Sources▾

Model existence: https://ingenico.com/us-en/products-services/payment-terminals/tetra/lane3600
screen.diagonalIn: https://ingenico.com/sites/default/files/resource-document/2024-09/USA-CAN%5FDATASHEET%5FLANE%5F3600%5FING%5F240801.pdf
screen.resolution: https://ingenico.com/sites/default/files/resource-document/2024-09/USA-CAN%5FDATASHEET%5FLANE%5F3600%5FING%5F240801.pdf
screen.touchTechnology: https://ingenico.com/sites/default/files/resource-document/2024-09/USA-CAN%5FDATASHEET%5FLANE%5F3600%5FING%5F240801.pdf
status: https://ingenico.com/us-en/products-services/payment-terminals/tetra/lane3600
cleaning: https://ingenico.com/us-en/merchant-support-hub
oemProtector: https://ingenico.com/sites/default/files/resource-document/2024-09/USA-CAN%5FDATASHEET%5FLANE%5F3600%5FING%5F240801.pdf
screen.screenSurface: https://ingenico.com/sites/default/files/resource-document/2023-10/LANE%203600%20datasheet_SEPT23.pdf
weightG: https://ingenico.com/sites/default/files/resource-document/2023-10/LANE%203600%20datasheet_SEPT23.pdf
cleaning[0]: https://ingenico.com/us-en/merchant-support-hub

Research notes: Official datasheet: display '2.8'' backlight, glass lens, QVGA (320x240 pixels)', touchscreen 'Capacitive, finger (1000K lifespan signature)'. PCI PTS v6. Accessories per datasheet/product page: standard PCI-compliant privacy shield (factory mounted), Kensington lock, standpole, kiosk adaptation plate - no screen protector. Optional 512MB RAM variant, 0.3MP QR camera. Screen area in mm not published. Weight is terminal full option without PINshield. OEM publishes LxWxH; mapped to width/height/depth per form factor.

More POS & Payment Terminals Material guidance Fleet installation guide

Also known as: Lane 3600, Lane3600