POS & PAYMENT TERMINALS
Ingenico iCT250 Screen Protector
The Ingenico iCT250 is a point-of-sale and payment terminal with a 2.7" display, 320x240 (QVGA) resolution. In payment fleets this screen is customer-facing all day: PIN-entry privacy, counter impact, and terminal cleaning frequency shape the protection spec. Privacy and wipe-safe options are matched through the specification request. Screen dimensions are sourced from manufacturer documentation; protector cut dimensions are confirmed with the supplier before production.
Specs last verified 2026-09-05 · every fact links its source below.
Protector availability for this model
First-party accessory availability varies by terminal family; where the OEM lists a protector the part number is shown with its source.
FIRST-PARTY (OEM)
None found
AFTERMARKET
No dedicated protector found
CUSTOM-CUT (VIA RFQ)
Available: matched suppliers cut to this model
Free for buyers. Cut dimensions are confirmed with the supplier before any production run.
Device and display data
| Manufacturer: | Ingenico |
|---|---|
| Device family: | iCT (Telium 2) |
| Display diagonal: | 2.7 insource ↗ |
| Screen width (active): | Unknown |
| Screen height (active): | Unknown |
| Display resolution: | 320x240 (QVGA)source ↗ |
| Touch input: | Unknown |
| Screen type: | TFT colorsource ↗ |
| Brightness: | Unknown |
| Screen surface (device): | Unknown |
| Screens on device: | Unknown |
| Rounded corners: | Unknown |
| Aspect ratio (derived): | Unknown |
| Pixel density (derived): | 148 PPI |
| Device width (housing): | 83 mmsource ↗ |
| Device height (housing): | 185 mmsource ↗ |
| Device depth (housing): | 63 mmsource ↗ |
| IP rating (device): | Unknown |
| Weight: | 325 gsource ↗ |
| Cut dimensions: | Verification required |
Screen dimensions are the device’s active display area, not protector cut dimensions. Cut sizes depend on bezel geometry and adhesive design and are confirmed with the supplier before any production run. Housing dimensions are the overall device body, not the screen. Aspect ratio and pixel density are derived from the sourced values above.
OEM cleaning guidance
- Soft non-abrasive cloth dampened with soapy water or approved cleaning product; apply liquid to cloth, never directly to terminal; disconnect cables first; no solvents, detergents, or abrasivessource ↗
Published by the device manufacturer for the device. We make no compatibility claims about any screen protector and these chemicals.
Protection decision factors
Counter impact
Consider
Customer-facing privacy
Privacy film options
Frequent cleaning
Check OEM chemistry below
Frequently asked questions
What screen size is the iCT250?
The iCT250 has a 2.7" display, per Ingenico documentation.
Does Ingenico make a first-party screen protector for the iCT250?
We found no first-party protector for this model in the sources checked; custom-cut via matched suppliers is the current path.
What cleaning products can be used on the iCT250 screen?
Ingenico publishes guidance covering 1 cleaning agent for this device, listed in the OEM cleaning guidance section above. That guidance applies to the device's own screen; we make no compatibility claims between any cleaning chemical and any screen protector.
Can screen protectors for the iCT250 be sourced in quantity?
Yes. Submit a specification request with quantity and deployment environment, and matched suppliers respond with options cut for this model. Cut dimensions are confirmed with the supplier before any production run.
Material shortlist
PET film
Thin profile- Low profile
- Cost-effective at fleet quantity
- Verify cleaning-chemical compatibility with the supplier
✓ Discuss fit for your workflow
TPU film
Flexible film- Flexible application on curved areas
- Verify impact behavior with the supplier
- Confirm wear characteristics for your replacement cycle
ⓘ Evaluate based on workflow
Tempered glass
Rigid glass- Rigid construction
- Confirm thickness and touch sensitivity on your models
- Verify glove and stylus behavior with the supplier
ⓘ Confirm cut and fit first
Where this device runs
Industry guides covering the deployment conditions and cleaning chemistry this device faces.
Sources▾
- Model existence: https://myaccounthelpcenter.zendesk.com/hc/en-us/articles/12047498833307-Ingenico-iCT220-and-iCT250-End-of-Life-Notification
- screen.diagonalIn: https://fiscal.treasury.gov/system/files/files/cas/ing-iCT220.pdf
- screen.resolution: https://fiscal.treasury.gov/system/files/files/cas/ing-iCT220.pdf
- status: https://myaccounthelpcenter.zendesk.com/hc/en-us/articles/12047498833307-Ingenico-iCT220-and-iCT250-End-of-Life-Notification
- cleaning: https://ingenico.com/us-en/merchant-support-hub
- screen.screenType: https://thirdcoastmerchantservices.com/wp-content/uploads/2020/12/ict250-data-sheet-copy.pdf
- deviceDimensions.widthMm: https://thirdcoastmerchantservices.com/wp-content/uploads/2020/12/ict250-data-sheet-copy.pdf
- deviceDimensions.heightMm: https://thirdcoastmerchantservices.com/wp-content/uploads/2020/12/ict250-data-sheet-copy.pdf
- deviceDimensions.depthMm: https://thirdcoastmerchantservices.com/wp-content/uploads/2020/12/ict250-data-sheet-copy.pdf
- weightG: https://thirdcoastmerchantservices.com/wp-content/uploads/2020/12/ict250-data-sheet-copy.pdf
- cleaning[0]: https://ingenico.com/us-en/merchant-support-hub
Research notes: Display per official Ingenico iCT 200 Series datasheet mirrored on fiscal.treasury.gov (loaded): iCT250 gets 'TFT color, 2,7'' QVGA 320 x 240 pixels'. Not a touchscreen device (15 backlit keys) - touchTechnology null. PCI PTS 2.x & 3.x. Terminal size 185 x 83 x 63 mm, 325 g (device, not screen). Optional privacy shield. Status: EOL zendesk page 403-blocked; discontinued status is snippet-level evidence [unverified by direct load]. Ingenico datasheet mirrored on reseller (Third Coast); weight without paper roll/cable. OEM publishes LxWxH; mapped to width/height/depth per form factor.
Also known as: iCT 250, ICT250
Related iCT (Telium 2) models: Ingenico iCT220Ingenico Desk/5000Ingenico e285Ingenico iSC Touch 250Ingenico Lane/3000Ingenico Lane/3600