RUGGED HANDHELDS
Zebra MC3300x Screen Protector
The Zebra MC3300x is a rugged handheld computer with a 4" display, 800x480 resolution. Rugged handhelds live with drops, gloved input, and scanner-heavy workflows. Fleet buyers usually start from the manufacturer's own film part number when one exists, then compare custom-cut options for quantity pricing. Screen dimensions are sourced from manufacturer documentation; protector cut dimensions are confirmed with the supplier before production.
Specs last verified 2026-09-05 · every fact links its source below.
Protector availability for this model
Check the first-party part number first: it is the accessory most handheld manufacturers publish, and it anchors like-for-like custom-cut quotes.
FIRST-PARTY (OEM)
Yes (MISC-MC33-SCRN-01)source ↗
AFTERMARKET
CUSTOM-CUT (VIA RFQ)
Available: matched suppliers cut to this model
Free for buyers. Cut dimensions are confirmed with the supplier before any production run.
Device and display data
| Manufacturer: | Zebra |
|---|---|
| Device family: | MC3300 |
| Display diagonal: | 4 insource ↗ |
| Screen width (active): | Unknown |
| Screen height (active): | Unknown |
| Display resolution: | 800x480source ↗ |
| Touch input: | capacitive (dual input mode)source ↗ |
| Screen type: | Unknown |
| Brightness: | Unknown |
| Screen surface (device): | Unknown |
| Screens on device: | Unknown |
| Rounded corners: | Unknown |
| Aspect ratio (derived): | Unknown |
| Pixel density (derived): | 233 PPI |
| Device width (housing): | Unknown |
| Device height (housing): | Unknown |
| Device depth (housing): | Unknown |
| IP rating (device): | Unknown |
| Weight: | Unknown |
| Cut dimensions: | Verification required |
Screen dimensions are the device’s active display area, not protector cut dimensions. Cut sizes depend on bezel geometry and adhesive design and are confirmed with the supplier before any production run. Housing dimensions are the overall device body, not the screen. Aspect ratio and pixel density are derived from the sourced values above.
OEM cleaning guidance
- 70% isopropyl alcohol wipes / 70% isopropyl alcohol (per Zebra MC3-series PRG)source ↗
Published by the device manufacturer for the device. We make no compatibility claims about any screen protector and these chemicals.
Protection decision factors
Drop exposure
Consider
Glove touch
Verify thickness
Frequent cleaning
Check OEM chemistry below
Scanner clarity
Consider
Frequently asked questions
What screen size is the MC3300x?
The MC3300x has a 4" display, per Zebra documentation.
Does Zebra make a first-party screen protector for the MC3300x?
Yes. Zebra lists a first-party protector (part MISC-MC33-SCRN-01).
What cleaning products can be used on the MC3300x screen?
Zebra publishes guidance covering 1 cleaning agent for this device, listed in the OEM cleaning guidance section above. That guidance applies to the device's own screen; we make no compatibility claims between any cleaning chemical and any screen protector.
Can screen protectors for the MC3300x be sourced in quantity?
Yes. Submit a specification request with quantity and deployment environment, and matched suppliers respond with options cut for this model. Cut dimensions are confirmed with the supplier before any production run.
Material shortlist
PET film
Thin profile- Low profile
- Cost-effective at fleet quantity
- Verify cleaning-chemical compatibility with the supplier
✓ Discuss fit for your workflow
TPU film
Flexible film- Flexible application on curved areas
- Verify impact behavior with the supplier
- Confirm wear characteristics for your replacement cycle
ⓘ Evaluate based on workflow
Tempered glass
Rigid glass- Rigid construction
- Confirm thickness and touch sensitivity on your models
- Verify glove and stylus behavior with the supplier
ⓘ Confirm cut and fit first
Where this device runs
Industry guides covering the deployment conditions and cleaning chemistry this device faces.
Sources▾
- Model existence: https://www.zebra.com/ap/en/products/mobile-computers/handheld/mc3300.html
- screen.diagonalIn: https://www.zebra.com/us/en/products/spec-sheets/mobile-computers/handheld/mc3300x.html
- screen.resolution: https://www.zebra.com/us/en/products/spec-sheets/mobile-computers/handheld/mc3300x.html
- screen.touchTechnology: https://www.zebra.com/us/en/products/spec-sheets/mobile-computers/handheld/mc3300x.html
- cleaning: https://docs.zebra.com/us/en/mobile-computers/handheld/mc3-series/mc34-prg/c-mc34-maintenance-and-troubleshooting/r-cleaning-instructions/r-cleaning-materials-required.html
- oemProtector: https://www.zebra.com/content/dam/support-dam/en/documentation/unrestricted/guide/product/mc3300xr-ig.pdf
- cleaning[0]: https://docs.zebra.com/us/en/mobile-computers/handheld/mc3-series/mc34-prg/c-mc34-maintenance-and-troubleshooting/r-cleaning-instructions/r-cleaning-materials-required.html
Research notes: Official spec sheet: '4 in. WVGA (800 x 480)', Gorilla Glass touch panel with air gap. Master model list had 4.3-in; the official spec sheet says 4.0-in. OEM protector MISC-MC33-SCRN-01 listed in the Zebra MC3300XR install guide ('Provides additional protection for display'); aftermarket Complogics page confirms MC3300x fit.
Also known as: MC3300X, MC33X
Related MC3300 models: Zebra MC3300Zebra EC30Zebra EC50Zebra EC55Zebra EM45Zebra HC20