POS & PAYMENT TERMINALS

Touch Dynamic Pulse Screen Protector

The Touch Dynamic Pulse is a point-of-sale and payment terminal with a 15" display, 1024x768 resolution. In payment fleets this screen is customer-facing all day: PIN-entry privacy, counter impact, and terminal cleaning frequency shape the protection spec. Privacy and wipe-safe options are matched through the specification request. Screen dimensions are sourced from manufacturer documentation; protector cut dimensions are confirmed with the supplier before production.

Specs sourced from manufacturer documentationDiscontinued (still in fleets)Commercial fleet

Specs last verified 2026-09-05 · every fact links its source below.

Protector availability for this model

First-party accessory availability varies by terminal family; where the OEM lists a protector the part number is shown with its source.

FIRST-PARTY (OEM)

None foundsource ↗

AFTERMARKET

No dedicated protector found

CUSTOM-CUT (VIA RFQ)

Available: matched suppliers cut to this model

Request fleet options for this terminal or use the form on this page

Free for buyers. Cut dimensions are confirmed with the supplier before any production run.

Device and display data

Manufacturer:	Touch Dynamic
Device family:	Pulse
Display diagonal:	15 insource ↗
Screen width (active):	Unknown
Screen height (active):	Unknown
Display resolution:	1024x768source ↗
Touch input:	Resistive touchsource ↗
Screen type:	Unknown
Brightness:	Unknown
Screen surface (device):	Unknown
Screens on device:	Unknown
Rounded corners:	Unknown
Aspect ratio (derived):	Unknown
Pixel density (derived):	85 PPI
Device width (housing):	Unknown
Device height (housing):	Unknown
Device depth (housing):	Unknown
IP rating (device):	Unknown
Weight:	Unknown
Cut dimensions:	Verification required

ⓘ

Screen dimensions are the device’s active display area, not protector cut dimensions. Cut sizes depend on bezel geometry and adhesive design and are confirmed with the supplier before any production run. Housing dimensions are the overall device body, not the screen. Aspect ratio and pixel density are derived from the sourced values above.

OEM cleaning guidance

Dry, soft lint-free (microfiber) clothsource ↗
Distilled water lightly dampened on a soft lint-free clothsource ↗
Commercial touchscreen cleaning kit solutionsource ↗

Published by the device manufacturer for the device. We make no compatibility claims about any screen protector and these chemicals.

Protection decision factors

Counter impact

Consider

Customer-facing privacy

Privacy film options

Frequent cleaning

Check OEM chemistry below

Frequently asked questions

What screen size is the Pulse?

The Pulse has a 15" display, per Touch Dynamic documentation.

Does Touch Dynamic make a first-party screen protector for the Pulse?

We found no first-party protector for this model in the sources checked; custom-cut via matched suppliers is the current path.

What cleaning products can be used on the Pulse screen?

Touch Dynamic publishes guidance covering 3 cleaning agents for this device, listed in the OEM cleaning guidance section above. That guidance applies to the device's own screen; we make no compatibility claims between any cleaning chemical and any screen protector.

Can screen protectors for the Pulse be sourced in quantity?

Yes. Submit a specification request with quantity and deployment environment, and matched suppliers respond with options cut for this model. Cut dimensions are confirmed with the supplier before any production run.

Material shortlist

PET film

Thin profile

Low profile
Cost-effective at fleet quantity
Verify cleaning-chemical compatibility with the supplier

✓ Discuss fit for your workflow

TPU film

Flexible film

Flexible application on curved areas
Verify impact behavior with the supplier
Confirm wear characteristics for your replacement cycle

ⓘ Evaluate based on workflow

Tempered glass

Rigid glass

Rigid construction
Confirm thickness and touch sensitivity on your models
Verify glove and stylus behavior with the supplier

ⓘ Confirm cut and fit first

Where this device runs

Industry guides covering the deployment conditions and cleaning chemistry this device faces.

Food Service Retail

Sources▾

Model existence: https://www.touchdynamic.com/
screen.diagonalIn: https://posguys.com/pos-computer_42/Touch-Dynamic-Pulse_1230/
screen.resolution: https://posguys.com/pos-computer_42/Touch-Dynamic-Pulse_1230/
screen.touchTechnology: https://posguys.com/pos-computer_42/Touch-Dynamic-Pulse_1230/
status: https://www.touchdynamic.com/collections/all-products
cleaning: https://www.touchdynamic.com/blogs/news/need-know-caring-touchscreen-pos-system
oemProtector: https://www.touchwindow.com/c/TouchDynamicAccessories.html
cleaning[0]: https://www.touchdynamic.com/blogs/news/need-know-caring-touchscreen-pos-system
cleaning[1]: https://www.touchdynamic.com/blogs/news/need-know-caring-touchscreen-pos-system
cleaning[2]: https://www.touchdynamic.com/blogs/news/need-know-caring-touchscreen-pos-system

Research notes: RESELLER SOURCE (secondary): plain Pulse is no longer on touchdynamic.com; 15in LCD resistive 1024x768 per POSGuys product spec table (page loaded). Resellers note some Pulse units shipped with PCAP instead of resistive [unverified]. The Pulse family continues as Pulse Ultra (15in/17in PCAP, live product page exists at touchdynamic.com/products/pulse-ultra-touchscreen-computer but is outside this batch) and Pulse Ultra WS / Pulse Ion. Status discontinued [inferred from absence on current OEM site].

More POS & Payment Terminals Material guidance Fleet installation guide

Also known as: Pulse Touchscreen Computer