Skip to content
ScreenProtector.org
Preview build: the catalog is still growing. Every published fact shows its verification state; see how we verify.

COMMERCIAL TOUCH DISPLAYS

Allen-Bradley PanelView 5510 (15 in) Screen Protector

The Rockwell Automation PanelView 5510 (15 in) is a commercial touch display with a 15" display, 304 Γ— 228 mm active area, 1024x768 resolution. Commercial and industrial displays run large and non-standard sizes where off-the-shelf protectors rarely exist. Custom cutting to the measured active area is the default sourcing path, ordered in fleet quantity. Screen dimensions are sourced from manufacturer documentation; protector cut dimensions are confirmed with the supplier before production.

Specs sourced from manufacturer documentationCommercial fleet

Specs last verified 2026-09-05 Β· every fact links its source below.

Protector availability for this model

First-party protection is uncommon at display sizes; specify the measured screen and quantity and matched suppliers quote custom cuts.

FIRST-PARTY (OEM)

Yes

AFTERMARKET

No dedicated protector found

CUSTOM-CUT (VIA RFQ)

Available: matched suppliers cut to this model

Request quantity pricing for this displayor use the form on this page

Free for buyers. Cut dimensions are confirmed with the supplier before any production run.

Device and display data

Manufacturer:Rockwell Automation
Device family:PanelView 5000
Display diagonal:15 insource β†—
Screen width (active):304 mmsource β†—
Screen height (active):228 mmsource β†—
Display resolution:1024x768source β†—
Touch input:analog resistivesource β†—
Screen type:Unknown
Brightness:Unknown
Screen surface (device):Unknown
Screens on device:Unknown
Rounded corners:Unknown
Aspect ratio (derived):4:3
Pixel density (derived):85 PPI
Device width (housing):Unknown
Device height (housing):Unknown
Device depth (housing):Unknown
IP rating (device):Unknown
Weight:Unknown
Cut dimensions:Verification required
β“˜

Screen dimensions are the device’s active display area, not protector cut dimensions. Cut sizes depend on bezel geometry and adhesive design and are confirmed with the supplier before any production run. Housing dimensions are the overall device body, not the screen. Aspect ratio and pixel density are derived from the sourced values above.

OEM cleaning guidance

  • mild soap or detergent on clean sponge or soft cloth (dry with chamois or moist cellulose sponge)source β†—
  • isopropyl alcohol 70% (paint/grease removal, rub lightly, then mild soap solution and rinse with clean water)source β†—
  • mild glass cleaner (window or eyeglass cleaner recommended) on clean lint-free cloth (protective overlay)source β†—

Published by the device manufacturer for the device. We make no compatibility claims about any screen protector and these chemicals.

Protection decision factors

Impact exposure

Consider

Cleaning regime

Check OEM chemistry below

Non-standard sizes

Custom cut is the default

Frequently asked questions

What screen size is the PanelView 5510 (15 in)?

The PanelView 5510 (15 in) has a 15" display with a 304 Γ— 228 mm active area, per Rockwell Automation documentation.

Does Rockwell Automation make a first-party screen protector for the PanelView 5510 (15 in)?

Yes. Rockwell Automation lists a first-party protector.

What cleaning products can be used on the PanelView 5510 (15 in) screen?

Rockwell Automation publishes guidance covering 3 cleaning agents for this device, listed in the OEM cleaning guidance section above. That guidance applies to the device's own screen; we make no compatibility claims between any cleaning chemical and any screen protector.

Can screen protectors for the PanelView 5510 (15 in) be sourced in quantity?

Yes. Submit a specification request with quantity and deployment environment, and matched suppliers respond with options cut for this model. Cut dimensions are confirmed with the supplier before any production run.

Material shortlist

PET film

Thin profile
  • Low profile
  • Cost-effective at fleet quantity
  • Verify cleaning-chemical compatibility with the supplier

βœ“ Discuss fit for your workflow

TPU film

Flexible film
  • Flexible application on curved areas
  • Verify impact behavior with the supplier
  • Confirm wear characteristics for your replacement cycle

β“˜ Evaluate based on workflow

Tempered glass

Rigid glass
  • Rigid construction
  • Confirm thickness and touch sensitivity on your models
  • Verify glove and stylus behavior with the supplier

β“˜ Confirm cut and fit first

Where this device runs

Industry guides covering the deployment conditions and cleaning chemistry this device faces.

Sourcesβ–Ύ

Research notes: Rockwell 2715P-TD001: 15-in resistive touch (2715P-T15CD, view area 304 x 228 mm, 1024x768 XGA 4:3, analog resistive) and 15.6-in capacitive variant (2715P-C15WD, 1920x1080, projective capacitive - different screen hardware, listed under aliases only). Keypad variant 2715P-B15CD. OEM protective overlays 2711P-RGT15SP/RGB15P and 2715P-C15WD.

Also known as: 2715P-T15CD, 2715P-B15CD, 2715P-C15WD, PanelView 5510 15in

Related PanelView 5000 models: Allen-Bradley PanelView 5310 (12 in)Allen-Bradley PanelView 5310 (7 in)Allen-Bradley PanelView 5310 (9 in)Allen-Bradley PanelView 5510 (12.1 in)Allen-Bradley PanelView 5510 (19 in)Allen-Bradley PanelView 5510 (21.5 in)