COMMERCIAL TOUCH DISPLAYS

Allen-Bradley PanelView 5310 (12 in) Screen Protector

The Rockwell Automation PanelView 5310 (12 in) is a commercial touch display with a 12.1" display, 261 × 163 mm active area, 1280x800 resolution. Commercial and industrial displays run large and non-standard sizes where off-the-shelf protectors rarely exist. Custom cutting to the measured active area is the default sourcing path, ordered in fleet quantity. Screen dimensions are sourced from manufacturer documentation; protector cut dimensions are confirmed with the supplier before production.

Specs sourced from manufacturer documentationCommercial fleet

Specs last verified 2026-09-05 · every fact links its source below.

Protector availability for this model

First-party protection is uncommon at display sizes; specify the measured screen and quantity and matched suppliers quote custom cuts.

FIRST-PARTY (OEM)

Yes

AFTERMARKET

No dedicated protector found

CUSTOM-CUT (VIA RFQ)

Available: matched suppliers cut to this model

Request quantity pricing for this display or use the form on this page

Free for buyers. Cut dimensions are confirmed with the supplier before any production run.

Device and display data

Manufacturer:	Rockwell Automation
Device family:	PanelView 5000
Display diagonal:	12.1 insource ↗
Screen width (active):	261 mmsource ↗
Screen height (active):	163 mmsource ↗
Display resolution:	1280x800source ↗
Touch input:	analog resistivesource ↗
Screen type:	Unknown
Brightness:	Unknown
Screen surface (device):	Unknown
Screens on device:	Unknown
Rounded corners:	Unknown
Aspect ratio (derived):	1.60:1
Pixel density (derived):	125 PPI
Device width (housing):	Unknown
Device height (housing):	Unknown
Device depth (housing):	Unknown
IP rating (device):	Unknown
Weight:	Unknown
Cut dimensions:	Verification required

ⓘ

Screen dimensions are the device’s active display area, not protector cut dimensions. Cut sizes depend on bezel geometry and adhesive design and are confirmed with the supplier before any production run. Housing dimensions are the overall device body, not the screen. Aspect ratio and pixel density are derived from the sourced values above.

OEM cleaning guidance

mild soap or detergent on clean sponge or soft cloth (dry with chamois or moist cellulose sponge)source ↗
isopropyl alcohol 70% (paint/grease removal, rub lightly, then mild soap solution and rinse with clean water)source ↗

Published by the device manufacturer for the device. We make no compatibility claims about any screen protector and these chemicals.

Protection decision factors

Impact exposure

Consider

Cleaning regime

Check OEM chemistry below

Non-standard sizes

Custom cut is the default

Frequently asked questions

What screen size is the PanelView 5310 (12 in)?

The PanelView 5310 (12 in) has a 12.1" display with a 261 × 163 mm active area, per Rockwell Automation documentation.

Does Rockwell Automation make a first-party screen protector for the PanelView 5310 (12 in)?

Yes. Rockwell Automation lists a first-party protector.

What cleaning products can be used on the PanelView 5310 (12 in) screen?

Rockwell Automation publishes guidance covering 2 cleaning agents for this device, listed in the OEM cleaning guidance section above. That guidance applies to the device's own screen; we make no compatibility claims between any cleaning chemical and any screen protector.

Can screen protectors for the PanelView 5310 (12 in) be sourced in quantity?

Yes. Submit a specification request with quantity and deployment environment, and matched suppliers respond with options cut for this model. Cut dimensions are confirmed with the supplier before any production run.

Material shortlist

PET film

Thin profile

Low profile
Cost-effective at fleet quantity
Verify cleaning-chemical compatibility with the supplier

✓ Discuss fit for your workflow

TPU film

Flexible film

Flexible application on curved areas
Verify impact behavior with the supplier
Confirm wear characteristics for your replacement cycle

ⓘ Evaluate based on workflow

Tempered glass

Rigid glass

Rigid construction
Confirm thickness and touch sensitivity on your models
Verify glove and stylus behavior with the supplier

ⓘ Confirm cut and fit first

Where this device runs

Industry guides covering the deployment conditions and cleaning chemistry this device faces.

Manufacturing Food Service

Sources▾

Model existence: https://www.rockwellautomation.com/en-us/products/hardware/hmi/panelview-5000.html
screen.widthMm: https://literature.rockwellautomation.com/idc/groups/literature/documents/td/2713p-td001_-en-p.pdf
screen.heightMm: https://literature.rockwellautomation.com/idc/groups/literature/documents/td/2713p-td001_-en-p.pdf
screen.diagonalIn: https://literature.rockwellautomation.com/idc/groups/literature/documents/td/2713p-td001_-en-p.pdf
screen.resolution: https://literature.rockwellautomation.com/idc/groups/literature/documents/td/2713p-td001_-en-p.pdf
screen.touchTechnology: https://literature.rockwellautomation.com/idc/groups/literature/documents/td/2713p-td001_-en-p.pdf
cleaning: https://literature.rockwellautomation.com/idc/groups/literature/documents/um/2713p-um001_-en-p.pdf
oemProtector: https://literature.rockwellautomation.com/idc/groups/literature/documents/td/2713p-td001_-en-p.pdf
cleaning[0]: https://literature.rockwellautomation.com/idc/groups/literature/documents/um/2713p-um001_-en-p.pdf
cleaning[1]: https://literature.rockwellautomation.com/idc/groups/literature/documents/um/2713p-um001_-en-p.pdf

Research notes: Rockwell 2713P-TD001: 2713P-T12WD1 = 12.1-in widescreen, view area 261 x 163 mm, 1280x800 WXGA 16:10, analog resistive. OEM protective overlay 2711P-RGT12SP (shared with 5510; increased air gap on 5310). The 5310 line also includes 6-in (5.7-in screen, 2713P-T6CD1) and 10.4-in (2713P-T10CD1) sizes not in this batch.

More Commercial Touch Displays Material guidance Fleet installation guide

Also known as: 2713P-T12WD1, 2713P-T12WD1-B, 2713P-T12WD1-K, PanelView 5310 12in