COMMERCIAL TOUCH DISPLAYS

Omron NA5-7W Sysmac HMI (7.0 in wide) Screen Protector

The Omron NA5-7W is a commercial touch display with a 7" display, 152 × 91 mm active area, 800x480 resolution. Commercial and industrial displays run large and non-standard sizes where off-the-shelf protectors rarely exist. Custom cutting to the measured active area is the default sourcing path, ordered in fleet quantity. Screen dimensions are sourced from manufacturer documentation; protector cut dimensions are confirmed with the supplier before production.

Specs sourced from manufacturer documentationCommercial fleet

Specs last verified 2026-09-05 · every fact links its source below.

Protector availability for this model

First-party protection is uncommon at display sizes; specify the measured screen and quantity and matched suppliers quote custom cuts.

FIRST-PARTY (OEM)

None found

AFTERMARKET

No dedicated protector found

CUSTOM-CUT (VIA RFQ)

Available: matched suppliers cut to this model

Request quantity pricing for this display or use the form on this page

Free for buyers. Cut dimensions are confirmed with the supplier before any production run.

Device and display data

Manufacturer:	Omron
Device family:	NA Series
Display diagonal:	7 insource ↗
Screen width (active):	152 mmsource ↗
Screen height (active):	91 mmsource ↗
Display resolution:	800x480source ↗
Touch input:	analog resistive (membrane)source ↗
Screen type:	Unknown
Brightness:	Unknown
Screen surface (device):	Unknown
Screens on device:	Unknown
Rounded corners:	Unknown
Aspect ratio (derived):	1.67:1
Pixel density (derived):	133 PPI
Device width (housing):	Unknown
Device height (housing):	Unknown
Device depth (housing):	Unknown
IP rating (device):	Unknown
Weight:	Unknown
Cut dimensions:	Verification required

ⓘ

Screen dimensions are the device’s active display area, not protector cut dimensions. Cut sizes depend on bezel geometry and adhesive design and are confirmed with the supplier before any production run. Housing dimensions are the overall device body, not the screen. Aspect ratio and pixel density are derived from the sourced values above.

OEM cleaning guidance

dry soft cloth (daily); water-dampened cloth first for heavy dirtsource ↗
neutral cleanser, approx. 2% solution applied to wrung-out cloth (never benzene, thinner, or chemical cloths)source ↗

Published by the device manufacturer for the device. We make no compatibility claims about any screen protector and these chemicals.

Protection decision factors

Impact exposure

Consider

Cleaning regime

Check OEM chemistry below

Non-standard sizes

Custom cut is the default

Frequently asked questions

What screen size is the NA5-7W?

The NA5-7W has a 7" display with a 152 × 91 mm active area, per Omron documentation.

Does Omron make a first-party screen protector for the NA5-7W?

We found no first-party protector for this model in the sources checked; custom-cut via matched suppliers is the current path.

What cleaning products can be used on the NA5-7W screen?

Omron publishes guidance covering 2 cleaning agents for this device, listed in the OEM cleaning guidance section above. That guidance applies to the device's own screen; we make no compatibility claims between any cleaning chemical and any screen protector.

Can screen protectors for the NA5-7W be sourced in quantity?

Yes. Submit a specification request with quantity and deployment environment, and matched suppliers respond with options cut for this model. Cut dimensions are confirmed with the supplier before any production run.

Material shortlist

PET film

Thin profile

Low profile
Cost-effective at fleet quantity
Verify cleaning-chemical compatibility with the supplier

✓ Discuss fit for your workflow

TPU film

Flexible film

Flexible application on curved areas
Verify impact behavior with the supplier
Confirm wear characteristics for your replacement cycle

ⓘ Evaluate based on workflow

Tempered glass

Rigid glass

Rigid construction
Confirm thickness and touch sensitivity on your models
Verify glove and stylus behavior with the supplier

ⓘ Confirm cut and fit first

Where this device runs

Industry guides covering the deployment conditions and cleaning chemistry this device faces.

Manufacturing Food Service

Sources▾

Model existence: https://www.ia.omron.com/products/family/3405/specification.html
screen.widthMm: https://www.ia.omron.com/products/family/3960/specification.html
screen.heightMm: https://www.ia.omron.com/products/family/3960/specification.html
screen.diagonalIn: https://www.ia.omron.com/products/family/3960/specification.html
screen.resolution: https://www.ia.omron.com/products/family/3960/specification.html
screen.touchTechnology: https://www.ia.omron.com/products/family/3960/specification.html
cleaning: https://baltacom.com/upload/uf/8f9/8f9fb69b33e2c4bd7b878c27baff2ec3.pdf
cleaning[0]: https://baltacom.com/upload/uf/8f9/8f9fb69b33e2c4bd7b878c27baff2ec3.pdf
cleaning[1]: https://baltacom.com/upload/uf/8f9/8f9fb69b33e2c4bd7b878c27baff2ec3.pdf

Research notes: Effective display area 152 x 91 mm per official NA -V2 spec page (identical on -V1 page, family/3405). Touch: analog resistive membrane, 16,384 x 16,384 step. Cleaning per NA-series Hardware User's Manual ch.6-1-4 (mirror URL; official document). No OEM protective sheet found for NA series.

More Commercial Touch Displays Material guidance Fleet installation guide

Also known as: NA5-7W01B, NA5-7W-V1, NA5-7W-V2