COMMERCIAL TOUCH DISPLAYS
Omron NA5-12W Sysmac HMI (12.1 in wide) Screen Protector
The Omron NA5-12W is a commercial touch display with a 12.1" display, 261 × 163 mm active area, 800x480 resolution. Commercial and industrial displays run large and non-standard sizes where off-the-shelf protectors rarely exist. Custom cutting to the measured active area is the default sourcing path, ordered in fleet quantity. Screen dimensions are sourced from manufacturer documentation; protector cut dimensions are confirmed with the supplier before production.
Specs last verified 2026-09-05 · every fact links its source below.
Protector availability for this model
First-party protection is uncommon at display sizes; specify the measured screen and quantity and matched suppliers quote custom cuts.
FIRST-PARTY (OEM)
None found
AFTERMARKET
No dedicated protector found
CUSTOM-CUT (VIA RFQ)
Available: matched suppliers cut to this model
Free for buyers. Cut dimensions are confirmed with the supplier before any production run.
Device and display data
| Manufacturer: | Omron |
|---|---|
| Device family: | NA Series |
| Display diagonal: | 12.1 insource ↗ |
| Screen width (active): | 261 mmsource ↗ |
| Screen height (active): | 163 mmsource ↗ |
| Display resolution: | 800x480source ↗ |
| Touch input: | analog resistive (membrane)source ↗ |
| Screen type: | Unknown |
| Brightness: | Unknown |
| Screen surface (device): | Unknown |
| Screens on device: | Unknown |
| Rounded corners: | Unknown |
| Aspect ratio (derived): | 1.60:1 |
| Pixel density (derived): | 77 PPI |
| Device width (housing): | Unknown |
| Device height (housing): | Unknown |
| Device depth (housing): | Unknown |
| IP rating (device): | Unknown |
| Weight: | Unknown |
| Cut dimensions: | Verification required |
Screen dimensions are the device’s active display area, not protector cut dimensions. Cut sizes depend on bezel geometry and adhesive design and are confirmed with the supplier before any production run. Housing dimensions are the overall device body, not the screen. Aspect ratio and pixel density are derived from the sourced values above.
OEM cleaning guidance
- dry soft cloth (daily); water-dampened cloth first for heavy dirtsource ↗
- neutral cleanser, approx. 2% solution applied to wrung-out cloth (never benzene, thinner, or chemical cloths)source ↗
Published by the device manufacturer for the device. We make no compatibility claims about any screen protector and these chemicals.
Protection decision factors
Impact exposure
Consider
Cleaning regime
Check OEM chemistry below
Non-standard sizes
Custom cut is the default
Frequently asked questions
What screen size is the NA5-12W?
The NA5-12W has a 12.1" display with a 261 × 163 mm active area, per Omron documentation.
Does Omron make a first-party screen protector for the NA5-12W?
We found no first-party protector for this model in the sources checked; custom-cut via matched suppliers is the current path.
What cleaning products can be used on the NA5-12W screen?
Omron publishes guidance covering 2 cleaning agents for this device, listed in the OEM cleaning guidance section above. That guidance applies to the device's own screen; we make no compatibility claims between any cleaning chemical and any screen protector.
Can screen protectors for the NA5-12W be sourced in quantity?
Yes. Submit a specification request with quantity and deployment environment, and matched suppliers respond with options cut for this model. Cut dimensions are confirmed with the supplier before any production run.
Material shortlist
PET film
Thin profile- Low profile
- Cost-effective at fleet quantity
- Verify cleaning-chemical compatibility with the supplier
✓ Discuss fit for your workflow
TPU film
Flexible film- Flexible application on curved areas
- Verify impact behavior with the supplier
- Confirm wear characteristics for your replacement cycle
ⓘ Evaluate based on workflow
Tempered glass
Rigid glass- Rigid construction
- Confirm thickness and touch sensitivity on your models
- Verify glove and stylus behavior with the supplier
ⓘ Confirm cut and fit first
Where this device runs
Industry guides covering the deployment conditions and cleaning chemistry this device faces.
Sources▾
- Model existence: https://www.ia.omron.com/products/family/3405/specification.html
- screen.widthMm: https://www.ia.omron.com/products/family/3960/specification.html
- screen.heightMm: https://www.ia.omron.com/products/family/3960/specification.html
- screen.diagonalIn: https://www.ia.omron.com/products/family/3960/specification.html
- screen.resolution: https://www.ia.omron.com/products/family/3960/specification.html
- screen.touchTechnology: https://www.ia.omron.com/products/family/3960/specification.html
- cleaning: https://baltacom.com/upload/uf/8f9/8f9fb69b33e2c4bd7b878c27baff2ec3.pdf
- cleaning[0]: https://baltacom.com/upload/uf/8f9/8f9fb69b33e2c4bd7b878c27baff2ec3.pdf
- cleaning[1]: https://baltacom.com/upload/uf/8f9/8f9fb69b33e2c4bd7b878c27baff2ec3.pdf
Research notes: Effective display area 261 x 163 mm per official spec pages.
Also known as: NA5-12W01B, NA5-12W-V1, NA5-12W-V2
Related NA Series models: Omron NA5-15W Sysmac HMI (15.4 in wide)Omron NA5-7W Sysmac HMI (7.0 in wide)Omron NA5-9W Sysmac HMI (9.0 in wide)Omron NB10W-TW01B HMI (10.1 in wide)Omron NB5Q-TW01B HMI (5.7 in)Omron NB7W-TW01B HMI (7 in wide)