POS & PAYMENT TERMINALS

Touch Dynamic Quest VIII Ultra Screen Protector

The Touch Dynamic Quest VIII Ultra is a point-of-sale and payment terminal with a 8" display, 1920x1200 resolution. In payment fleets this screen is customer-facing all day: PIN-entry privacy, counter impact, and terminal cleaning frequency shape the protection spec. Privacy and wipe-safe options are matched through the specification request. Screen dimensions are sourced from manufacturer documentation; protector cut dimensions are confirmed with the supplier before production.

Specs sourced from manufacturer documentationCommercial fleet

Specs last verified 2026-09-05 · every fact links its source below.

Protector availability for this model

First-party accessory availability varies by terminal family; where the OEM lists a protector the part number is shown with its source.

FIRST-PARTY (OEM)

None foundsource ↗

AFTERMARKET

No dedicated protector found

CUSTOM-CUT (VIA RFQ)

Available: matched suppliers cut to this model

Request fleet options for this terminal or use the form on this page

Free for buyers. Cut dimensions are confirmed with the supplier before any production run.

Device and display data

Manufacturer:	Touch Dynamic
Device family:	Quest
Display diagonal:	8 insource ↗
Screen width (active):	Unknown
Screen height (active):	Unknown
Display resolution:	1920x1200source ↗
Touch input:	True-Flat PCAP Multi-Touch, Corning Gorilla Glass 3source ↗
Screen type:	Unknown
Brightness:	Unknown
Screen surface (device):	Unknown
Screens on device:	Unknown
Rounded corners:	Unknown
Aspect ratio (derived):	Unknown
Pixel density (derived):	283 PPI
Device width (housing):	236.2 mmsource ↗
Device height (housing):	147.3 mmsource ↗
Device depth (housing):	24.4 mmsource ↗
IP rating (device):	Unknown
Weight:	635 gsource ↗
Cut dimensions:	Verification required

ⓘ

Screen dimensions are the device’s active display area, not protector cut dimensions. Cut sizes depend on bezel geometry and adhesive design and are confirmed with the supplier before any production run. Housing dimensions are the overall device body, not the screen. Aspect ratio and pixel density are derived from the sourced values above.

OEM cleaning guidance

Dry, soft lint-free (microfiber) clothsource ↗
Distilled water lightly dampened on a soft lint-free clothsource ↗
Commercial touchscreen cleaning kit solutionsource ↗

Published by the device manufacturer for the device. We make no compatibility claims about any screen protector and these chemicals.

Protection decision factors

Counter impact

Consider

Customer-facing privacy

Privacy film options

Frequent cleaning

Check OEM chemistry below

Frequently asked questions

What screen size is the Quest VIII Ultra?

The Quest VIII Ultra has a 8" display, per Touch Dynamic documentation.

Does Touch Dynamic make a first-party screen protector for the Quest VIII Ultra?

We found no first-party protector for this model in the sources checked; custom-cut via matched suppliers is the current path.

What cleaning products can be used on the Quest VIII Ultra screen?

Touch Dynamic publishes guidance covering 3 cleaning agents for this device, listed in the OEM cleaning guidance section above. That guidance applies to the device's own screen; we make no compatibility claims between any cleaning chemical and any screen protector.

Can screen protectors for the Quest VIII Ultra be sourced in quantity?

Yes. Submit a specification request with quantity and deployment environment, and matched suppliers respond with options cut for this model. Cut dimensions are confirmed with the supplier before any production run.

Material shortlist

PET film

Thin profile

Low profile
Cost-effective at fleet quantity
Verify cleaning-chemical compatibility with the supplier

✓ Discuss fit for your workflow

TPU film

Flexible film

Flexible application on curved areas
Verify impact behavior with the supplier
Confirm wear characteristics for your replacement cycle

ⓘ Evaluate based on workflow

Tempered glass

Rigid glass

Rigid construction
Confirm thickness and touch sensitivity on your models
Verify glove and stylus behavior with the supplier

ⓘ Confirm cut and fit first

Where this device runs

Industry guides covering the deployment conditions and cleaning chemistry this device faces.

Education Food Service

Sources▾

Model existence: https://www.touchdynamic.com/pages/school-and-cafeteria-industry
screen.diagonalIn: https://www.touchdynamic.com/products/quest-viii-ultra
screen.resolution: https://www.touchdynamic.com/products/quest-viii-ultra
screen.touchTechnology: https://www.touchdynamic.com/products/quest-viii-ultra
status: https://www.touchdynamic.com/products/quest-viii-ultra
cleaning: https://www.touchdynamic.com/blogs/news/need-know-caring-touchscreen-pos-system
oemProtector: https://www.touchwindow.com/c/TouchDynamicAccessories.html
deviceDimensions.widthMm: https://www.barcodesinc.com/touch-dynamic/quest-viii-ultra.htm
deviceDimensions.heightMm: https://www.barcodesinc.com/touch-dynamic/quest-viii-ultra.htm
deviceDimensions.depthMm: https://www.barcodesinc.com/touch-dynamic/quest-viii-ultra.htm
weightG: https://www.barcodesinc.com/touch-dynamic/quest-viii-ultra.htm
cleaning[0]: https://www.touchdynamic.com/blogs/news/need-know-caring-touchscreen-pos-system
cleaning[1]: https://www.touchdynamic.com/blogs/news/need-know-caring-touchscreen-pos-system
cleaning[2]: https://www.touchdynamic.com/blogs/news/need-know-caring-touchscreen-pos-system

Research notes: 8in IPS LCD (1920x1200), True-Flat PCAP Multi-Touch with Corning Gorilla Glass 3; IP65, 4 ft drop rating. Chassis dimensions published (9.3in W x 5.8in H x 0.96in D) are not screen dimensions. No dedicated aftermarket protector found. Dims/weight from authorized reseller (Barcodes Inc); 9.3in W x 5.8in H x 0.96in D, 1.4 lbs without accessories.

More POS & Payment Terminals Material guidance Fleet installation guide

Also known as: Quest 8 Ultra, Quest VIII Ultra Mobile POS