COMMERCIAL TOUCH DISPLAYS
Teguar TM-4033-15 15.6-inch Medical Touchscreen PC Screen Protector
The Teguar TM-4033-15 is a commercial touch display with a 15.6" display, 1366x768 (optional 1920x1080) resolution. Commercial and industrial displays run large and non-standard sizes where off-the-shelf protectors rarely exist. Custom cutting to the measured active area is the default sourcing path, ordered in fleet quantity. Screen dimensions are sourced from manufacturer documentation; protector cut dimensions are confirmed with the supplier before production.
Specs last verified 2026-09-05 · every fact links its source below.
Protector availability for this model
First-party protection is uncommon at display sizes; specify the measured screen and quantity and matched suppliers quote custom cuts.
FIRST-PARTY (OEM)
None foundsource ↗
AFTERMARKET
No dedicated protector found
CUSTOM-CUT (VIA RFQ)
Available: matched suppliers cut to this model
Free for buyers. Cut dimensions are confirmed with the supplier before any production run.
Device and display data
| Manufacturer: | Teguar |
|---|---|
| Device family: | TM-4033 |
| Display diagonal: | 15.6 insource ↗ |
| Screen width (active): | Unknown |
| Screen height (active): | Unknown |
| Display resolution: | 1366x768 (optional 1920x1080)source ↗ |
| Touch input: | projected capacitivesource ↗ |
| Screen type: | Unknown |
| Brightness: | Unknown |
| Screen surface (device): | Unknown |
| Screens on device: | Unknown |
| Rounded corners: | Unknown |
| Aspect ratio (derived): | Unknown |
| Pixel density (derived): | 100 PPI |
| Device width (housing): | Unknown |
| Device height (housing): | Unknown |
| Device depth (housing): | Unknown |
| IP rating (device): | Unknown |
| Weight: | Unknown |
| Cut dimensions: | Verification required |
Screen dimensions are the device’s active display area, not protector cut dimensions. Cut sizes depend on bezel geometry and adhesive design and are confirmed with the supplier before any production run. Housing dimensions are the overall device body, not the screen. Aspect ratio and pixel density are derived from the sourced values above.
OEM cleaning guidance
- isopropyl alcohol (up to 70%)source ↗
- bleach solution (1/3 cup bleach per gallon distilled water)source ↗
- hydrogen peroxide (3-25%)source ↗
- quaternary ammonium compounds (3-15%)source ↗
- Caviwipessource ↗
- household disinfecting wipessource ↗
Published by the device manufacturer for the device. We make no compatibility claims about any screen protector and these chemicals.
Protection decision factors
Impact exposure
Consider
Cleaning regime
Check OEM chemistry below
Non-standard sizes
Custom cut is the default
Frequently asked questions
What screen size is the TM-4033-15?
The TM-4033-15 has a 15.6" display, per Teguar documentation.
Does Teguar make a first-party screen protector for the TM-4033-15?
We found no first-party protector for this model in the sources checked; custom-cut via matched suppliers is the current path.
What cleaning products can be used on the TM-4033-15 screen?
Teguar publishes guidance covering 6 cleaning agents for this device, listed in the OEM cleaning guidance section above. That guidance applies to the device's own screen; we make no compatibility claims between any cleaning chemical and any screen protector.
Can screen protectors for the TM-4033-15 be sourced in quantity?
Yes. Submit a specification request with quantity and deployment environment, and matched suppliers respond with options cut for this model. Cut dimensions are confirmed with the supplier before any production run.
Material shortlist
PET film
Thin profile- Low profile
- Cost-effective at fleet quantity
- Verify cleaning-chemical compatibility with the supplier
✓ Discuss fit for your workflow
TPU film
Flexible film- Flexible application on curved areas
- Verify impact behavior with the supplier
- Confirm wear characteristics for your replacement cycle
ⓘ Evaluate based on workflow
Tempered glass
Rigid glass- Rigid construction
- Confirm thickness and touch sensitivity on your models
- Verify glove and stylus behavior with the supplier
ⓘ Confirm cut and fit first
Where this device runs
Industry guides covering the deployment conditions and cleaning chemistry this device faces.
Sources▾
- Model existence: https://teguar.com/medical-computers/
- screen.diagonalIn: https://teguar.com/product/tm-4033-15/
- screen.resolution: https://teguar.com/product/tm-4033-15/
- screen.touchTechnology: https://teguar.com/product/tm-4033-15/
- cleaning: https://teguar.com/product-cleaning-guidelines/
- oemProtector: https://teguar.com/product/tm-4033-15/
- cleaning[0]: https://teguar.com/product-cleaning-guidelines/
- cleaning[1]: https://teguar.com/product-cleaning-guidelines/
- cleaning[2]: https://teguar.com/product-cleaning-guidelines/
- cleaning[3]: https://teguar.com/product-cleaning-guidelines/
- cleaning[4]: https://teguar.com/product-cleaning-guidelines/
- cleaning[5]: https://teguar.com/product-cleaning-guidelines/
Research notes: PCAP or resistive touch options per discovery; loaded page lists Projected Capacitive in the spec table [resistive option not re-verified]. 220 nits. IP65 waterproof rated front bezel 'easy to spray and clean' per product page. Overall unit 396 x 48 x 245 mm published but that is enclosure, not active area.
Also known as: TM-4033-15
More Commercial Touch Displays from Teguar: Teguar TM-3110-19 19-inch Fanless Medical PCTeguar TM-3110-22 21.5-inch Fanless Medical PCTeguar TM-4433-10 10.1-inch Medical Panel ComputerTeguar TM-4815-10 10.1-inch Medical Panel PCTeguar TM-5040-16 15.6-inch Medical All-in-One