COMMERCIAL TOUCH DISPLAYS
Siemens SIMATIC HMI MTP700 Unified Comfort Screen Protector
The Siemens MTP700 Unified is a commercial touch display with a 7" display, 152.4 × 91.4 mm active area, 800x480 resolution. Commercial and industrial displays run large and non-standard sizes where off-the-shelf protectors rarely exist. Custom cutting to the measured active area is the default sourcing path, ordered in fleet quantity. Screen dimensions are sourced from manufacturer documentation; protector cut dimensions are confirmed with the supplier before production.
Specs last verified 2026-09-05 · every fact links its source below.
Protector availability for this model
First-party protection is uncommon at display sizes; specify the measured screen and quantity and matched suppliers quote custom cuts.
FIRST-PARTY (OEM)
Yes
AFTERMARKET
No dedicated protector found
CUSTOM-CUT (VIA RFQ)
Available: matched suppliers cut to this model
Free for buyers. Cut dimensions are confirmed with the supplier before any production run.
Device and display data
| Manufacturer: | Siemens |
|---|---|
| Device family: | SIMATIC Unified Panels |
| Display diagonal: | 7 insource ↗ |
| Screen width (active): | 152.4 mmsource ↗ |
| Screen height (active): | 91.4 mmsource ↗ |
| Display resolution: | 800x480source ↗ |
| Touch input: | capacitivesource ↗ |
| Screen type: | Unknown |
| Brightness: | Unknown |
| Screen surface (device): | Unknown |
| Screens on device: | Unknown |
| Rounded corners: | Unknown |
| Aspect ratio (derived): | 1.67:1 |
| Pixel density (derived): | 133 PPI |
| Device width (housing): | Unknown |
| Device height (housing): | Unknown |
| Device depth (housing): | Unknown |
| IP rating (device): | Unknown |
| Weight: | Unknown |
| Cut dimensions: | Verification required |
Screen dimensions are the device’s active display area, not protector cut dimensions. Cut sizes depend on bezel geometry and adhesive design and are confirmed with the supplier before any production run. Housing dimensions are the overall device body, not the screen. Aspect ratio and pixel density are derived from the sourced values above.
OEM cleaning guidance
- damp cleaning cloth with dishwashing liquid or foaming screen cleaning agent (spray onto cloth, never onto device; no aggressive solvents or scouring agents, no compressed air or steam; switch device off)source ↗
Published by the device manufacturer for the device. We make no compatibility claims about any screen protector and these chemicals.
Protection decision factors
Impact exposure
Consider
Cleaning regime
Check OEM chemistry below
Non-standard sizes
Custom cut is the default
Frequently asked questions
What screen size is the MTP700 Unified?
The MTP700 Unified has a 7" display with a 152.4 × 91.4 mm active area, per Siemens documentation.
Does Siemens make a first-party screen protector for the MTP700 Unified?
Yes. Siemens lists a first-party protector.
What cleaning products can be used on the MTP700 Unified screen?
Siemens publishes guidance covering 1 cleaning agent for this device, listed in the OEM cleaning guidance section above. That guidance applies to the device's own screen; we make no compatibility claims between any cleaning chemical and any screen protector.
Can screen protectors for the MTP700 Unified be sourced in quantity?
Yes. Submit a specification request with quantity and deployment environment, and matched suppliers respond with options cut for this model. Cut dimensions are confirmed with the supplier before any production run.
Material shortlist
PET film
Thin profile- Low profile
- Cost-effective at fleet quantity
- Verify cleaning-chemical compatibility with the supplier
✓ Discuss fit for your workflow
TPU film
Flexible film- Flexible application on curved areas
- Verify impact behavior with the supplier
- Confirm wear characteristics for your replacement cycle
ⓘ Evaluate based on workflow
Tempered glass
Rigid glass- Rigid construction
- Confirm thickness and touch sensitivity on your models
- Verify glove and stylus behavior with the supplier
ⓘ Confirm cut and fit first
Where this device runs
Industry guides covering the deployment conditions and cleaning chemistry this device faces.
Sources▾
- Model existence: https://www.siemens.com/en-us/products/simatic-hmi/wincc-unified-hardware/
- screen.widthMm: https://support.industry.siemens.com/teddatasheet/?format=pdf&mlfbs=6AV2128-3GB06-0AX0&language=en&caller=SIOS
- screen.heightMm: https://support.industry.siemens.com/teddatasheet/?format=pdf&mlfbs=6AV2128-3GB06-0AX0&language=en&caller=SIOS
- screen.diagonalIn: https://support.industry.siemens.com/teddatasheet/?format=pdf&mlfbs=6AV2128-3GB06-0AX0&language=en&caller=SIOS
- screen.resolution: https://support.industry.siemens.com/teddatasheet/?format=pdf&mlfbs=6AV2128-3GB06-0AX0&language=en&caller=SIOS
- screen.touchTechnology: https://www.industry-mobile-support.siemens-info.com/en/article/detail/109779106
- oemProtector: https://support.industry.siemens.com/teddatasheet/?format=pdf&mlfbs=6AV6881-0GJ22-0AA0&language=en&caller=SIOS
- cleaning: https://docs.tia.siemens.cloud/r/unified_comfort_panels_enus_20/device-maintenance-and-repair/cleaning-the-device/cleaning-the-glass-front-of-the-hmi-device
- cleaning[0]: https://docs.tia.siemens.cloud/r/unified_comfort_panels_enus_20/device-maintenance-and-repair/cleaning-the-device/cleaning-the-glass-front-of-the-hmi-device
Research notes: TED: 7 in, 152.4 x 91.4 mm, 800x480, 'Design as multi-touch screen: Yes' (type not stated in TED; capacitive per official Siemens delivery release 109779106: 'capacitive glass front with multitouch technology', text confirmed via search excerpt of that page [not directly loaded, JS-gated]). TED header flags article as '*** spare part ***' (successor article likely exists). OEM film 6AV6881-0GJ22-0AA0 'Protective film 7" front, surface, type 5, adhesive over the entire surface, no reflection, matte' - mapped to MTP700 per Siemens MDM accessories table ID 109826164 (search excerpt). Cleaning source is JS-rendered; wording verified via search excerpts and matches the identical section verified verbatim in the downloaded Unified Basic Panels OP PDF (cache.industry.siemens.com/dl/files/134/109818134/att_1161474/v1/HWUnifiedBasicPanelsenUS_en-US.pdf).
Also known as: 6AV2128-3GB06-0AX0, MTP700, MTP700 Unified Comfort
Related SIMATIC Unified Panels models: Siemens SIMATIC HMI MTP1000 Unified ComfortSiemens SIMATIC HMI MTP1200 Unified ComfortSiemens SIMATIC HMI MTP1500 Unified ComfortSiemens SIMATIC HMI MTP1900 Unified ComfortSiemens SIMATIC HMI MTP2200 Unified ComfortSiemens SIMATIC HMI KTP1200 Basic (2nd Generation)