COMMERCIAL TOUCH DISPLAYS

Schneider Electric Magelis XBT GT1135 Advanced Touchscreen Panel 3.8-inch QVGA Screen Protector

The Schneider Electric XBTGT1135 is a commercial touch display with a 3.8" display, 320x240 resolution. Commercial and industrial displays run large and non-standard sizes where off-the-shelf protectors rarely exist. Custom cutting to the measured active area is the default sourcing path, ordered in fleet quantity. Screen dimensions are sourced from manufacturer documentation; protector cut dimensions are confirmed with the supplier before production.

Specs sourced from manufacturer documentationDiscontinued (still in fleets)Commercial fleet

Specs last verified 2026-09-05 · every fact links its source below.

Protector availability for this model

First-party protection is uncommon at display sizes; specify the measured screen and quantity and matched suppliers quote custom cuts.

FIRST-PARTY (OEM)

None found

AFTERMARKET

No dedicated protector found

CUSTOM-CUT (VIA RFQ)

Available: matched suppliers cut to this model

Request quantity pricing for this display or use the form on this page

Free for buyers. Cut dimensions are confirmed with the supplier before any production run.

Device and display data

Manufacturer:	Schneider Electric
Device family:	Magelis XBT GT
Display diagonal:	3.8 insource ↗
Screen width (active):	Unknown
Screen height (active):	Unknown
Display resolution:	320x240source ↗
Touch input:	Unknown
Screen type:	Unknown
Brightness:	Unknown
Screen surface (device):	Unknown
Screens on device:	Unknown
Rounded corners:	Unknown
Aspect ratio (derived):	Unknown
Pixel density (derived):	105 PPI
Device width (housing):	Unknown
Device height (housing):	Unknown
Device depth (housing):	Unknown
IP rating (device):	Unknown
Weight:	Unknown
Cut dimensions:	Verification required

ⓘ

Screen dimensions are the device’s active display area, not protector cut dimensions. Cut sizes depend on bezel geometry and adhesive design and are confirmed with the supplier before any production run. Housing dimensions are the overall device body, not the screen. Aspect ratio and pixel density are derived from the sourced values above.

OEM cleaning guidance

soft cloth soaked in water with neutral detergent, wrung tightly; do not use paint thinner, organic solvents, or strong acid compoundssource ↗

Published by the device manufacturer for the device. We make no compatibility claims about any screen protector and these chemicals.

Protection decision factors

Impact exposure

Consider

Cleaning regime

Check OEM chemistry below

Non-standard sizes

Custom cut is the default

Frequently asked questions

What screen size is the XBTGT1135?

The XBTGT1135 has a 3.8" display, per Schneider Electric documentation.

Does Schneider Electric make a first-party screen protector for the XBTGT1135?

We found no first-party protector for this model in the sources checked; custom-cut via matched suppliers is the current path.

What cleaning products can be used on the XBTGT1135 screen?

Schneider Electric publishes guidance covering 1 cleaning agent for this device, listed in the OEM cleaning guidance section above. That guidance applies to the device's own screen; we make no compatibility claims between any cleaning chemical and any screen protector.

Can screen protectors for the XBTGT1135 be sourced in quantity?

Yes. Submit a specification request with quantity and deployment environment, and matched suppliers respond with options cut for this model. Cut dimensions are confirmed with the supplier before any production run.

Material shortlist

PET film

Thin profile

Low profile
Cost-effective at fleet quantity
Verify cleaning-chemical compatibility with the supplier

✓ Discuss fit for your workflow

TPU film

Flexible film

Flexible application on curved areas
Verify impact behavior with the supplier
Confirm wear characteristics for your replacement cycle

ⓘ Evaluate based on workflow

Tempered glass

Rigid glass

Rigid construction
Confirm thickness and touch sensitivity on your models
Verify glove and stylus behavior with the supplier

ⓘ Confirm cut and fit first

Where this device runs

Industry guides covering the deployment conditions and cleaning chemistry this device faces.

Manufacturing Food Service

Sources▾

Model existence: https://www.se.com/us/en/product/XBTGT1135/advanced-touchscreen-panel-320-x-240-pixels-qvga-3-8-24-v/
screen.diagonalIn: https://www.se.com/us/en/product/XBTGT1135/advanced-touchscreen-panel-320-x-240-pixels-qvga-3-8-24-v/
screen.resolution: https://www.se.com/us/en/product/XBTGT1135/advanced-touchscreen-panel-320-x-240-pixels-qvga-3-8-24-v/
cleaning: https://www.se.com/us/en/download/document/35010372K01000/
cleaning[0]: https://www.se.com/us/en/download/document/35010372K01000/

Research notes: se.com product page (title/slug verified via search): 'advanced touchscreen panel - 320 x 240 pixels QVGA - 3.8 inch - 24 V DC'. End of commercialization per se.com; refurb market active (JC-Electronics, Classic Automation). Touch type not stated in retrieved docs for this exact model (Magelis GT panels are analog resistive; the GT4000/5000 datasheets state 'Touch panel: Analogue') - left null. The 2005 XBT GT hardware guide documents Active Display Area 76.7 x 57.5 mm for the same 3.8-in QVGA class (XBT GT1100/GT1130, STN) but GT1135 is not covered in that edition, so display area left null [unverified: likely identical]. Cleaning text from the XBT GT Hardware Guide 'Regular Cleaning' section (doc 35010372; se.com download page is JS-gated, text verified verbatim in the 12/2005 edition PDF cached in _pdf/schneider/).

More Commercial Touch Displays Material guidance Fleet installation guide

Also known as: XBTGT1135, XBT GT1135, Magelis XBTGT1135