COMMERCIAL TOUCH DISPLAYS
IDEC HG1G 4.3-inch Compact HMI Screen Protector
The IDEC HG1G is a commercial touch display with a 4.3" display, 480x272 resolution. Commercial and industrial displays run large and non-standard sizes where off-the-shelf protectors rarely exist. Custom cutting to the measured active area is the default sourcing path, ordered in fleet quantity. Screen dimensions are sourced from manufacturer documentation; protector cut dimensions are confirmed with the supplier before production.
Specs last verified 2026-09-05 · every fact links its source below.
Protector availability for this model
First-party protection is uncommon at display sizes; specify the measured screen and quantity and matched suppliers quote custom cuts.
FIRST-PARTY (OEM)
Yes (HG9Z-1D4PN05)source ↗
AFTERMARKET
No dedicated protector found
CUSTOM-CUT (VIA RFQ)
Available: matched suppliers cut to this model
Free for buyers. Cut dimensions are confirmed with the supplier before any production run.
Device and display data
| Manufacturer: | IDEC |
|---|---|
| Device family: | HG Series |
| Display diagonal: | 4.3 insource ↗ |
| Screen width (active): | Unknown |
| Screen height (active): | Unknown |
| Display resolution: | 480x272source ↗ |
| Touch input: | resistivesource ↗ |
| Screen type: | Unknown |
| Brightness: | Unknown |
| Screen surface (device): | Unknown |
| Screens on device: | Unknown |
| Rounded corners: | Unknown |
| Aspect ratio (derived): | Unknown |
| Pixel density (derived): | 128 PPI |
| Device width (housing): | Unknown |
| Device height (housing): | Unknown |
| Device depth (housing): | Unknown |
| IP rating (device): | Unknown |
| Weight: | Unknown |
| Cut dimensions: | Verification required |
Screen dimensions are the device’s active display area, not protector cut dimensions. Cut sizes depend on bezel geometry and adhesive design and are confirmed with the supplier before any production run. Housing dimensions are the overall device body, not the screen. Aspect ratio and pixel density are derived from the sourced values above.
OEM cleaning guidance
No OEM-published cleaning guidance found for this model.
Published by the device manufacturer for the device. We make no compatibility claims about any screen protector and these chemicals.
Protection decision factors
Impact exposure
Consider
Cleaning regime
Check OEM chemistry below
Non-standard sizes
Custom cut is the default
Frequently asked questions
What screen size is the HG1G?
The HG1G has a 4.3" display, per IDEC documentation.
Does IDEC make a first-party screen protector for the HG1G?
Yes. IDEC lists a first-party protector (part HG9Z-1D4PN05).
What cleaning products can be used on the HG1G screen?
We have not found OEM-published cleaning guidance for this model. Follow your organization's device-care policy and the manufacturer's current documentation.
Can screen protectors for the HG1G be sourced in quantity?
Yes. Submit a specification request with quantity and deployment environment, and matched suppliers respond with options cut for this model. Cut dimensions are confirmed with the supplier before any production run.
Material shortlist
PET film
Thin profile- Low profile
- Cost-effective at fleet quantity
- Verify cleaning-chemical compatibility with the supplier
✓ Discuss fit for your workflow
TPU film
Flexible film- Flexible application on curved areas
- Verify impact behavior with the supplier
- Confirm wear characteristics for your replacement cycle
ⓘ Evaluate based on workflow
Tempered glass
Rigid glass- Rigid construction
- Confirm thickness and touch sensitivity on your models
- Verify glove and stylus behavior with the supplier
ⓘ Confirm cut and fit first
Where this device runs
Industry guides covering the deployment conditions and cleaning chemistry this device faces.
Sources▾
- Model existence: https://mktg.idec.com/en-us/products/idec-hmi
- screen.diagonalIn: https://www.controlcomponentsinc.com/documents/idec-hmi-selection-guide-2019.pdf
- screen.resolution: https://www.controlcomponentsinc.com/documents/idec-hmi-selection-guide-2019.pdf
- screen.touchTechnology: https://mktg.idec.com/en-us/products/idec-hmi
- oemProtector: https://www.idec.com/en-ca/automation/operator-interfaces/hmi/hg1g-4in-compact/hg9z-1d4pn05
Research notes: Selection guide (IDEC MARCOM-102 2019): 4.3 in color TFT 480Wx272H, 800 cd/m2, part numbers HG1G-4VT22TF-B/S; family page: analog resistive touch, 70,000 h backlight min, IP66F/IP67F/Type 4X/13, Class I Div 2. OEM protector page title: 'Protective Sheet 4.3 HMI 5pcs', 'HG1G protective sheet (5pcs)'.
Also known as: HG1G-4VT22TF-B, HG1G-4VT22TF-S, MICRO/I HG1G
Related HG Series models: IDEC HG2G 5.7-inch Enhanced HMIIDEC HG2J 7-inch Wide HMIIDEC HG3G (10.4 in)IDEC HG3G 8.4-inch High Performance HMIIDEC HG3G 10.4-inch High Performance HMIIDEC HG4G 12.1-inch High Performance HMI