COMMERCIAL TOUCH DISPLAYS

Hope Industrial 22 in Widescreen Panel Mount Monitor Screen Protector

The Hope Industrial Systems HIS-ML22 is a commercial touch display with a 22" display, 1680x1050 resolution. Commercial and industrial displays run large and non-standard sizes where off-the-shelf protectors rarely exist. Custom cutting to the measured active area is the default sourcing path, ordered in fleet quantity. Screen dimensions are sourced from manufacturer documentation; protector cut dimensions are confirmed with the supplier before production.

Specs sourced from manufacturer documentationCommercial fleet

Specs last verified 2026-09-05 · every fact links its source below.

Protector availability for this model

First-party protection is uncommon at display sizes; specify the measured screen and quantity and matched suppliers quote custom cuts.

FIRST-PARTY (OEM)

Yessource ↗

AFTERMARKET

No dedicated protector found

CUSTOM-CUT (VIA RFQ)

Available: matched suppliers cut to this model

Request quantity pricing for this display or use the form on this page

Free for buyers. Cut dimensions are confirmed with the supplier before any production run.

Device and display data

Manufacturer:	Hope Industrial Systems
Device family:	Hope Industrial Monitors
Display diagonal:	22 insource ↗
Screen width (active):	Unknown
Screen height (active):	Unknown
Display resolution:	1680x1050source ↗
Touch input:	5-wire single-touch resistive, polyester anti-glare window (standard); glass-armored resistive or PCAP options; non-touch window optionssource ↗
Screen type:	Unknown
Brightness:	Unknown
Screen surface (device):	Unknown
Screens on device:	Unknown
Rounded corners:	Unknown
Aspect ratio (derived):	Unknown
Pixel density (derived):	90 PPI
Device width (housing):	Unknown
Device height (housing):	Unknown
Device depth (housing):	Unknown
IP rating (device):	Unknown
Weight:	Unknown
Cut dimensions:	Verification required

ⓘ

Screen dimensions are the device’s active display area, not protector cut dimensions. Cut sizes depend on bezel geometry and adhesive design and are confirmed with the supplier before any production run. Housing dimensions are the overall device body, not the screen. Aspect ratio and pixel density are derived from the sourced values above.

OEM cleaning guidance

standard glass cleaner without abrasive or oily content; soft cotton cloth only (no paper towels or abrasive materials); vinegar or ammonia safesource ↗

Published by the device manufacturer for the device. We make no compatibility claims about any screen protector and these chemicals.

Protection decision factors

Impact exposure

Consider

Cleaning regime

Check OEM chemistry below

Non-standard sizes

Custom cut is the default

Frequently asked questions

What screen size is the HIS-ML22?

The HIS-ML22 has a 22" display, per Hope Industrial Systems documentation.

Does Hope Industrial Systems make a first-party screen protector for the HIS-ML22?

Yes. Hope Industrial Systems lists a first-party protector.

What cleaning products can be used on the HIS-ML22 screen?

Hope Industrial Systems publishes guidance covering 1 cleaning agent for this device, listed in the OEM cleaning guidance section above. That guidance applies to the device's own screen; we make no compatibility claims between any cleaning chemical and any screen protector.

Can screen protectors for the HIS-ML22 be sourced in quantity?

Yes. Submit a specification request with quantity and deployment environment, and matched suppliers respond with options cut for this model. Cut dimensions are confirmed with the supplier before any production run.

Material shortlist

PET film

Thin profile

Low profile
Cost-effective at fleet quantity
Verify cleaning-chemical compatibility with the supplier

✓ Discuss fit for your workflow

TPU film

Flexible film

Flexible application on curved areas
Verify impact behavior with the supplier
Confirm wear characteristics for your replacement cycle

ⓘ Evaluate based on workflow

Tempered glass

Rigid glass

Rigid construction
Confirm thickness and touch sensitivity on your models
Verify glove and stylus behavior with the supplier

ⓘ Confirm cut and fit first

Where this device runs

Industry guides covering the deployment conditions and cleaning chemistry this device faces.

No industry guide covers this model yet. Browse more Commercial Touch Displays or the manufacturer hub for related deployment guidance.

Sources▾

screen.diagonalIn: https://store.hopeindustrial.com/products/panel-mount-monitors/22-panel-mount-monitor
screen.resolution: https://store.hopeindustrial.com/products/panel-mount-monitors/22-panel-mount-monitor
screen.touchTechnology: https://store.hopeindustrial.com/products/panel-mount-monitors/22-panel-mount-monitor
cleaning: https://www.hopeindustrial.com/wp-content/uploads/dlm_uploads/2018/03/User_Manual_ML22B.pdf
oemProtector: https://store.hopeindustrial.com/products/screen-protector
cleaning[0]: https://www.hopeindustrial.com/wp-content/uploads/dlm_uploads/2018/03/User_Manual_ML22B.pdf

Research notes: Store page: Display Size 22.0" diagonal (widescreen), Native Resolution WSXGA+ (1680 x 1050, 16:10), 250 nits, 1000:1. Manual ML22B Cleaning Instructions: 'DO NOT USE ABRASIVE MATERIALS, SUCH AS PAPER TOWELS OR DIRTY SHOP RAGS... ALWAYS USE A SOFT CLOTH, PREFERABLY MADE OF COTTON. All displays may be cleaned using any standard glass cleaner as long as there is no abrasive or oily content. Vinegar or ammonia will not hurt the screen.' Panel cutout for reference: 528.7 x 342.3 mm (device cutout, not screen dimensions).

More Commercial Touch Displays Material guidance Fleet installation guide

Also known as: 22 in Widescreen Panel Mount Monitor, HIS-ML22-STVI, Hope Industrial 22 inch widescreen panel mount