COMMERCIAL TOUCH DISPLAYS

Hope Industrial 15 in Panel Mount Monitor Screen Protector

The Hope Industrial Systems HIS-ML15 is a commercial touch display with a 15" display, 1024x768 resolution. Commercial and industrial displays run large and non-standard sizes where off-the-shelf protectors rarely exist. Custom cutting to the measured active area is the default sourcing path, ordered in fleet quantity. Screen dimensions are sourced from manufacturer documentation; protector cut dimensions are confirmed with the supplier before production.

Specs sourced from manufacturer documentationCommercial fleet

Specs last verified 2026-09-05 · every fact links its source below.

Protector availability for this model

First-party protection is uncommon at display sizes; specify the measured screen and quantity and matched suppliers quote custom cuts.

FIRST-PARTY (OEM)

Yessource ↗

AFTERMARKET

No dedicated protector found

CUSTOM-CUT (VIA RFQ)

Available: matched suppliers cut to this model

Request quantity pricing for this display or use the form on this page

Free for buyers. Cut dimensions are confirmed with the supplier before any production run.

Device and display data

Manufacturer:	Hope Industrial Systems
Device family:	Hope Industrial Monitors
Display diagonal:	15 insource ↗
Screen width (active):	Unknown
Screen height (active):	Unknown
Display resolution:	1024x768source ↗
Touch input:	5-wire single-touch resistive, polyester anti-glare window (standard); glass-armored resistive or PCAP options; non-touch window optionssource ↗
Screen type:	Unknown
Brightness:	Unknown
Screen surface (device):	Unknown
Screens on device:	Unknown
Rounded corners:	Unknown
Aspect ratio (derived):	Unknown
Pixel density (derived):	85 PPI
Device width (housing):	Unknown
Device height (housing):	Unknown
Device depth (housing):	Unknown
IP rating (device):	Unknown
Weight:	Unknown
Cut dimensions:	Verification required

ⓘ

Screen dimensions are the device’s active display area, not protector cut dimensions. Cut sizes depend on bezel geometry and adhesive design and are confirmed with the supplier before any production run. Housing dimensions are the overall device body, not the screen. Aspect ratio and pixel density are derived from the sourced values above.

OEM cleaning guidance

standard glass cleaner sprayed onto cloth/towel first (never directly on monitor); vinegar or ammonia safesource ↗

Published by the device manufacturer for the device. We make no compatibility claims about any screen protector and these chemicals.

Protection decision factors

Impact exposure

Consider

Cleaning regime

Check OEM chemistry below

Non-standard sizes

Custom cut is the default

Frequently asked questions

What screen size is the HIS-ML15?

The HIS-ML15 has a 15" display, per Hope Industrial Systems documentation.

Does Hope Industrial Systems make a first-party screen protector for the HIS-ML15?

Yes. Hope Industrial Systems lists a first-party protector.

What cleaning products can be used on the HIS-ML15 screen?

Hope Industrial Systems publishes guidance covering 1 cleaning agent for this device, listed in the OEM cleaning guidance section above. That guidance applies to the device's own screen; we make no compatibility claims between any cleaning chemical and any screen protector.

Can screen protectors for the HIS-ML15 be sourced in quantity?

Yes. Submit a specification request with quantity and deployment environment, and matched suppliers respond with options cut for this model. Cut dimensions are confirmed with the supplier before any production run.

Material shortlist

PET film

Thin profile

Low profile
Cost-effective at fleet quantity
Verify cleaning-chemical compatibility with the supplier

✓ Discuss fit for your workflow

TPU film

Flexible film

Flexible application on curved areas
Verify impact behavior with the supplier
Confirm wear characteristics for your replacement cycle

ⓘ Evaluate based on workflow

Tempered glass

Rigid glass

Rigid construction
Confirm thickness and touch sensitivity on your models
Verify glove and stylus behavior with the supplier

ⓘ Confirm cut and fit first

Where this device runs

Industry guides covering the deployment conditions and cleaning chemistry this device faces.

No industry guide covers this model yet. Browse more Commercial Touch Displays or the manufacturer hub for related deployment guidance.

Sources▾

screen.diagonalIn: https://store.hopeindustrial.com/products/panel-mount-monitors/15-panel-mount-monitor
screen.resolution: https://store.hopeindustrial.com/products/panel-mount-monitors/15-panel-mount-monitor
screen.touchTechnology: https://store.hopeindustrial.com/products/panel-mount-monitors/15-panel-mount-monitor
cleaning: https://www.hopeindustrial.com/wp-content/uploads/dlm_uploads/2018/03/User_Manual_ML15B.pdf
oemProtector: https://store.hopeindustrial.com/products/screen-protector
cleaning[0]: https://www.hopeindustrial.com/wp-content/uploads/dlm_uploads/2018/03/User_Manual_ML15B.pdf

Research notes: Store page: Display Size 15.0" diagonal, Native Resolution XGA (1024 x 768, 4:3), 400 nits, 1500:1; Window Options describe 5-wire single-touch resistive with polyester cover sheet + anti-glare acrylic hard-coat, with glass-armored resistive/PCAP and non-touch variants. NEMA/UL 12/4(/4X) and IP65/IP66 per model. Manual ML15B Cleaning section: 'Any standard glass cleaner can be used... Always spray the glass cleaner on the cloth or towel... Vinegar or ammonia will not hurt the touchscreen.' OEM protector fits Hope touch screens; 7-mil polyester, dry environments only, must not be cut or resized.

More Commercial Touch Displays Material guidance Fleet installation guide

Also known as: 15 in Panel Mount Monitor, HIS-ML15-STVI, Hope Industrial 15 inch panel mount