Skip to content
ScreenProtector.org
Preview build: the catalog is still growing. Every published fact shows its verification state; see how we verify.

POS & PAYMENT TERMINALS

Wacom STU-430 Screen Protector

The Wacom STU-430 is a point-of-sale and payment terminal with a 4.5" display, 96 Γ— 60 mm active area, 320x200 resolution. In payment fleets this screen is customer-facing all day: PIN-entry privacy, counter impact, and terminal cleaning frequency shape the protection spec. Privacy and wipe-safe options are matched through the specification request. Screen dimensions are sourced from manufacturer documentation; protector cut dimensions are confirmed with the supplier before production.

Specs sourced from manufacturer documentationCommercial fleet

Specs last verified 2026-09-05 Β· every fact links its source below.

Protector availability for this model

First-party accessory availability varies by terminal family; where the OEM lists a protector the part number is shown with its source.

FIRST-PARTY (OEM)

None found

CUSTOM-CUT (VIA RFQ)

Available: matched suppliers cut to this model

Request fleet options for this terminalor use the form on this page

Free for buyers. Cut dimensions are confirmed with the supplier before any production run.

Device and display data

Manufacturer:Wacom
Device family:STU
Display diagonal:4.5 insource β†—
Screen width (active):96 mmsource β†—
Screen height (active):60 mmsource β†—
Display resolution:320x200source β†—
Touch input:battery-free cordless EMR pen; pen sensor embedded under the display (not on the signing surface)source β†—
Screen type:F-STN positive reflective LCD (monochrome)source β†—
Brightness:Unknown
Screen surface (device):Unknown
Screens on device:1source β†—
Rounded corners:Unknown
Aspect ratio (derived):8:5
Pixel density (derived):84 PPI
Device width (housing):161 mmsource β†—
Device height (housing):174 mmsource β†—
Device depth (housing):11 mmsource β†—
IP rating (device):Unknown
Weight:280 gsource β†—
Cut dimensions:Verification required
β“˜

Screen dimensions are the device’s active display area, not protector cut dimensions. Cut sizes depend on bezel geometry and adhesive design and are confirmed with the supplier before any production run. Housing dimensions are the overall device body, not the screen. Aspect ratio and pixel density are derived from the sourced values above.

OEM cleaning guidance

  • 70 or 75 percent isopropyl alcohol applied to a soft lint-free cloth (never sprayed directly); unplug all cables first; no bleach, aerosol sprays, or abrasives; avoid moisture in openingssource β†—

Published by the device manufacturer for the device. We make no compatibility claims about any screen protector and these chemicals.

Protection decision factors

Counter impact

Consider

Customer-facing privacy

Privacy film options

Frequent cleaning

Check OEM chemistry below

Frequently asked questions

What screen size is the STU-430?

The STU-430 has a 4.5" display with a 96 Γ— 60 mm active area, per Wacom documentation.

Does Wacom make a first-party screen protector for the STU-430?

We found no first-party protector for this model in the sources checked; custom-cut via matched suppliers is the current path.

What cleaning products can be used on the STU-430 screen?

Wacom publishes guidance covering 1 cleaning agent for this device, listed in the OEM cleaning guidance section above. That guidance applies to the device's own screen; we make no compatibility claims between any cleaning chemical and any screen protector.

Can screen protectors for the STU-430 be sourced in quantity?

Yes. Submit a specification request with quantity and deployment environment, and matched suppliers respond with options cut for this model. Cut dimensions are confirmed with the supplier before any production run.

Material shortlist

PET film

Thin profile
  • Low profile
  • Cost-effective at fleet quantity
  • Verify cleaning-chemical compatibility with the supplier

βœ“ Discuss fit for your workflow

TPU film

Flexible film
  • Flexible application on curved areas
  • Verify impact behavior with the supplier
  • Confirm wear characteristics for your replacement cycle

β“˜ Evaluate based on workflow

Tempered glass

Rigid glass
  • Rigid construction
  • Confirm thickness and touch sensitivity on your models
  • Verify glove and stylus behavior with the supplier

β“˜ Confirm cut and fit first

Where this device runs

Industry guides covering the deployment conditions and cleaning chemistry this device faces.

Sourcesβ–Ύ

Research notes: Official marketing page (loaded): active area '4.5" (96 x 60 mm)', native resolution '320 x 200 pixels', screen type 'F-STN positive reflective LCD' (monochrome), dimensions '161 x 174 x 11 mm', 280 g with stand, 1024 pressure levels. Developer spec table (loaded) confirms: STU-430, 1024 levels, 200 Hz, 320x200, 96 x 60 mm, USB, Monochrome, AES-128/192/256. The 4.5" figure is Wacom's stated active-area size. Monochrome non-backlit LCD signature pad for workstation/network use; STU-430V variant adds USB serial/virtual COM. No OEM protector; Wacom accessories on loaded pages are pens/cables only. [enriched 2026-09-08, marketing page re-loaded] 'F-STN positive reflective LCD' monochrome panel; dimensions '161 x 174 x 11 mm' (the 11 mm figure is unit thickness, mapped to depth); weight '280 g (0.6 lbs)' as stated with stand. No brightness or IP rating published. Single signing display, scree

Also known as: STU 430, STU-430V, STU-430 Signature Pad

Related STU models: Wacom STU-530Wacom STU-540