Skip to content
ScreenProtector.org
Preview build: the catalog is still growing. Every published fact shows its verification state; see how we verify.

COMMERCIAL TOUCH DISPLAYS

Mitsubishi Electric GOT2000 GT2708 (8.4 in, VGA) Screen Protector

The Mitsubishi Electric GT2708-VTBD is a commercial touch display with a 8.4" display, 170.9 Γ— 128.2 mm active area, 640x480 resolution. Commercial and industrial displays run large and non-standard sizes where off-the-shelf protectors rarely exist. Custom cutting to the measured active area is the default sourcing path, ordered in fleet quantity. Screen dimensions are sourced from manufacturer documentation; protector cut dimensions are confirmed with the supplier before production.

Specs sourced from manufacturer documentationCommercial fleet

Specs last verified 2026-09-05 Β· every fact links its source below.

Protector availability for this model

First-party protection is uncommon at display sizes; specify the measured screen and quantity and matched suppliers quote custom cuts.

FIRST-PARTY (OEM)

Yes (GT25-08PSCC (clear) / GT25-08PSGC (antiglare))source β†—

AFTERMARKET

No dedicated protector found

CUSTOM-CUT (VIA RFQ)

Available: matched suppliers cut to this model

Request quantity pricing for this displayor use the form on this page

Free for buyers. Cut dimensions are confirmed with the supplier before any production run.

Device and display data

Manufacturer:Mitsubishi Electric
Device family:GOT2000 (GT27)
Display diagonal:8.4 insource β†—
Screen width (active):170.9 mmsource β†—
Screen height (active):128.2 mmsource β†—
Display resolution:640x480source β†—
Touch input:analog resistive (film)source β†—
Screen type:Unknown
Brightness:Unknown
Screen surface (device):Unknown
Screens on device:Unknown
Rounded corners:Unknown
Aspect ratio (derived):1.33:1
Pixel density (derived):95 PPI
Device width (housing):Unknown
Device height (housing):Unknown
Device depth (housing):Unknown
IP rating (device):Unknown
Weight:Unknown
Cut dimensions:Verification required
β“˜

Screen dimensions are the device’s active display area, not protector cut dimensions. Cut sizes depend on bezel geometry and adhesive design and are confirmed with the supplier before any production run. Housing dimensions are the overall device body, not the screen. Aspect ratio and pixel density are derived from the sourced values above.

OEM cleaning guidance

  • soft cloth moistened with neutral detergentsource β†—
  • ethanol (or isopropyl alcohol) for disinfecting; never chlorine-based cleaners, peroxides, acetone, ammonia, paint thinner, or benzenesource β†—

Published by the device manufacturer for the device. We make no compatibility claims about any screen protector and these chemicals.

Protection decision factors

Impact exposure

Consider

Cleaning regime

Check OEM chemistry below

Non-standard sizes

Custom cut is the default

Frequently asked questions

What screen size is the GT2708-VTBD?

The GT2708-VTBD has a 8.4" display with a 170.9 Γ— 128.2 mm active area, per Mitsubishi Electric documentation.

Does Mitsubishi Electric make a first-party screen protector for the GT2708-VTBD?

Yes. Mitsubishi Electric lists a first-party protector (part GT25-08PSCC (clear) / GT25-08PSGC (antiglare)).

What cleaning products can be used on the GT2708-VTBD screen?

Mitsubishi Electric publishes guidance covering 2 cleaning agents for this device, listed in the OEM cleaning guidance section above. That guidance applies to the device's own screen; we make no compatibility claims between any cleaning chemical and any screen protector.

Can screen protectors for the GT2708-VTBD be sourced in quantity?

Yes. Submit a specification request with quantity and deployment environment, and matched suppliers respond with options cut for this model. Cut dimensions are confirmed with the supplier before any production run.

Material shortlist

PET film

Thin profile
  • Low profile
  • Cost-effective at fleet quantity
  • Verify cleaning-chemical compatibility with the supplier

βœ“ Discuss fit for your workflow

TPU film

Flexible film
  • Flexible application on curved areas
  • Verify impact behavior with the supplier
  • Confirm wear characteristics for your replacement cycle

β“˜ Evaluate based on workflow

Tempered glass

Rigid glass
  • Rigid construction
  • Confirm thickness and touch sensitivity on your models
  • Verify glove and stylus behavior with the supplier

β“˜ Confirm cut and fit first

Where this device runs

Industry guides covering the deployment conditions and cleaning chemistry this device faces.

No industry guide covers this model yet. Browse more Commercial Touch Displays or the manufacturer hub for related deployment guidance.

Sourcesβ–Ύ

Research notes: Pinned from the master-list "GOT2000 (8.4 in)" row (VGA class). 8.4 in VGA 640x480, display area 170.9 x 128.2 mm per official faspec page (URL cites GT2708-VTBA, AC-power variant; VTBD is the same 24 V DC display hardware). SVGA variants GT2708-STBA/STBD are 800x600 and constitute different screen hardware. OEM sheet parts per the official GOT2000 Protective Sheet manual index (IB(NA)-0800499); manual PDF not retrievable this pass, fit [unverified on a loaded page].

Also known as: GT2708-VTBA, GT2708

More Commercial Touch Displays from Mitsubishi Electric: Mitsubishi Electric GOT SIMPLE GS2107 (7 in)Mitsubishi Electric GOT SIMPLE GS2110 (10.2 in)Mitsubishi Electric GOT2000 (8.4 in)Mitsubishi Electric GOT2000 GT2507 (7 in)Mitsubishi Electric GOT2000 GT2510 (10.1 in)Mitsubishi Electric GOT SIMPLE GS2107-WTBD-N (7 in wide)