RUGGED HANDHELDS
Intermec CN3 Screen Protector
The Intermec CN3 is a rugged handheld computer with a 3.5" display, 240x320 resolution. Rugged handhelds live with drops, gloved input, and scanner-heavy workflows. Fleet buyers usually start from the manufacturer's own film part number when one exists, then compare custom-cut options for quantity pricing. Screen dimensions are sourced from manufacturer documentation; protector cut dimensions are confirmed with the supplier before production.
Specs last verified 2026-09-05 · every fact links its source below.
Protector availability for this model
Check the first-party part number first: it is the accessory most handheld manufacturers publish, and it anchors like-for-like custom-cut quotes.
FIRST-PARTY (OEM)
None found
AFTERMARKET
No dedicated protector found
CUSTOM-CUT (VIA RFQ)
Available: matched suppliers cut to this model
Free for buyers. Cut dimensions are confirmed with the supplier before any production run.
Device and display data
| Manufacturer: | Intermec |
|---|---|
| Device family: | CN3 |
| Display diagonal: | 3.5 insource ↗ |
| Screen width (active): | Unknown |
| Screen height (active): | Unknown |
| Display resolution: | 240x320source ↗ |
| Touch input: | Unknown |
| Screen type: | Unknown |
| Brightness: | Unknown |
| Screen surface (device): | Unknown |
| Screens on device: | Unknown |
| Rounded corners: | Unknown |
| Aspect ratio (derived): | Unknown |
| Pixel density (derived): | 114 PPI |
| Device width (housing): | Unknown |
| Device height (housing): | Unknown |
| Device depth (housing): | Unknown |
| IP rating (device): | Unknown |
| Weight: | Unknown |
| Cut dimensions: | Verification required |
Screen dimensions are the device’s active display area, not protector cut dimensions. Cut sizes depend on bezel geometry and adhesive design and are confirmed with the supplier before any production run. Housing dimensions are the overall device body, not the screen. Aspect ratio and pixel density are derived from the sourced values above.
OEM cleaning guidance
No OEM-published cleaning guidance found for this model.
Published by the device manufacturer for the device. We make no compatibility claims about any screen protector and these chemicals.
Protection decision factors
Drop exposure
Consider
Glove touch
Verify thickness
Frequent cleaning
Check OEM chemistry below
Scanner clarity
Consider
Frequently asked questions
What screen size is the CN3?
The CN3 has a 3.5" display, per Intermec documentation.
Does Intermec make a first-party screen protector for the CN3?
We found no first-party protector for this model in the sources checked; custom-cut via matched suppliers is the current path.
What cleaning products can be used on the CN3 screen?
We have not found OEM-published cleaning guidance for this model. Follow your organization's device-care policy and the manufacturer's current documentation.
Can screen protectors for the CN3 be sourced in quantity?
Yes. Submit a specification request with quantity and deployment environment, and matched suppliers respond with options cut for this model. Cut dimensions are confirmed with the supplier before any production run.
Material shortlist
PET film
Thin profile- Low profile
- Cost-effective at fleet quantity
- Verify cleaning-chemical compatibility with the supplier
✓ Discuss fit for your workflow
TPU film
Flexible film- Flexible application on curved areas
- Verify impact behavior with the supplier
- Confirm wear characteristics for your replacement cycle
ⓘ Evaluate based on workflow
Tempered glass
Rigid glass- Rigid construction
- Confirm thickness and touch sensitivity on your models
- Verify glove and stylus behavior with the supplier
ⓘ Confirm cut and fit first
Where this device runs
Industry guides covering the deployment conditions and cleaning chemistry this device faces.
Sources▾
- Model existence: https://www.barcodesinc.com/intermec/cn3.htm
- screen.diagonalIn: https://www.janusbarkod.com.tr/upload/34/intermec-cn3-brosur-ingilizce.pdf
- screen.resolution: https://www.janusbarkod.com.tr/upload/34/intermec-cn3-brosur-ingilizce.pdf
Research notes: [secondary host] Intermec brand is now Honeywell; official Honeywell pages for the discontinued CN3 were not reachable, so display specs come from the official Intermec CN3 datasheet PDF mirrored by distributor Janus Barkod: "Display: 3.5 in (89 mm) QVGA (240 x 320 pixel) 64K color Transflective TFT-LCD, LED backlight"; the datasheet also states "The CN3 has a touch screen display" without naming the touch technology (resistive/capacitive), so touchTechnology is null. The 89 mm figure is the diagonal conversion, not width. Early transportation/logistics rugged handheld (GPS, camera for proof-of-service); legacy courier fleets. Note: CN3e/CN3 ni variants exist; not part of the batch list. No cleaning guidance or protectors found.
Also known as: Intermec CN3, CN3 (Intermec/Honeywell)